DSC HS-LDR - Installation Manual - English - Concourse EXP Door Installation Sheet

Digital Security Controls Cover Sheet Number Number Updated for reflecting modifications cabinet and door metalwork to locking performance 2 info for HS FDR HS 3 Added note for Safety 4 FCC Compliance Statement Updated Concourse logo DSC Concourse Door Installation Sheet Large Extra Large 33 01 8.5 x 11 White Paper 0.5 2 up Instructions Master Size 8.5 X 11 of Sheets in Master 2 Sided Printing Printing Not Required Not Applicable Finished Sheet Size Half Letter in x 8.5 in 1 HS LDR Installation Lock Stud door tabs into at bottom of panel Stud Warranty Security Controls warrants that for a period of 12 months from the date of purchase the product shall be free of in materials and workmanship under normal use and that in fulfillment of any breach of such warranty Digital Controls shall at its option repair or replace the defective equipment upon return of the equipment to its repair This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or han or damage due to causes beyond the control of Digital Security Controls such as lightning excessive voltage shock water damage or damage arising out of abuse alteration or improper application of the equipment foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other warranties expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls Digital Controls neither assumes responsibility nor authorizes any other person purporting to act on its behalf to modify to change this warranty nor to assume for it any other warranty or liability concerning this product no event shall Digital Security Controls be liable for any direct indirect or consequential damages loss of anticipated loss of time or any other losses incurred by the buyer in connection with the purchase installation or operation or of this product Digital Security Controls recommends that the entire system be completely tested on a regular basis How despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is possible for product to fail to perform as expected INFORMATION Changes or modifications not expressly approved by Digital Security Controls could the user authority to operate this equipment Installation Manual shall be used in conjunction with the Installation of the hosted equipment 2005 Digital Security Controls Canada www dsc com Support 1 800 387 3630 Canada US 905 760 3036 in Canada Series Cabinet Doors Instructions HS LDR series of cabinet doors are intended for use with the HS CAB series Cabinets including HS CAB1000 HS CAB3000 and HS CAB4000 Series steel plate doors that secure to the cabinet by inserting the tabs into the slots and pins provided at the bottom of the cabinet and in place of Package 1 Concourse Label for insertion into Label panel provided 1 Lock purchase separately 4 Mounting Screws Series Door 15.3in 389m 15.3 389mm 29.6in 752mm Height 43.9 in 1115mm 15.3 389mm Width 15.3 389mm Series Doors Installation the lockset into the opening 1 provided at the top of the door if used Affix the Concourse label to the front of the door in the area provided Slide the door tabs 2 at the bottom of the door into the slots in the bottom the cabinet with door at suitable angle to cabinet surface Push the top of the door towards the cabinet until door studs 3 at bottom cabinet holes and door is fully closed the key into the lock and turn to lock the cabinet if locks used Other attach with screws Maximum screw torque 25 lb in 2.8 Nm 1 HS LDR Installation Lock Stud door tabs into at bottom of panel Stud Warranty Security Controls warrants that for a period of 12 months from the date of purchase the product shall be free of in materials and workmanship under normal use and that in fulfillment of any breach of such warranty Digital Controls shall at its option repair or replace the defective equipment upon return of the equipment to its repair This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or han or damage due to causes beyond the control of Digital Security Controls such as lightning excessive voltage shock water damage or damage arising out of abuse alteration or improper application of the equipment foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other warranties expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls Digital Controls neither assumes responsibility nor authorizes any other person purporting to act on its behalf to modify to change this warranty nor to assume for it any other warranty or liability concerning this product no event shall Digital Security Controls be liable for any direct indirect or consequential damages loss of anticipated loss of time or any other losses incurred by the buyer in connection with the purchase installation or operation or of this product Digital Security Controls recommends that the entire system be completely tested on a regular basis How despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is possible for product to fail to perform as expected INFORMATION Changes or modifications not expressly approved by Digital Security Controls could the user authority to operate this equipment Installation Manual shall be used in conjunction with the Installation of the hosted equipment 2005 Digital Security Controls Canada cid 127 www dsc com Support 1 800 387 3630 Canada US 905 760 3036 in Canada Series Cabinet Doors Instructions HS LDR series of cabinet doors are intended for use with the HS CAB series Cabinets including HS CAB1000 HS CAB3000 and HS CAB4000 Series steel plate doors that secure to the cabinet by inserting the tabs into the slots and pins provided at the bottom of the cabinet and in place of Package 1 Concourse Label for insertion into Label panel provided 1 Lock purchase separately 4 Mounting Screws Series Door 15.3in 389m 15.3 389mm 29.6in 752mm Height 43.9 in 1115mm 15.3 389mm Width 15.3 389mm Series Doors Installation the lockset into the opening 1 provided at the top of the door if used Affix the Concourse label to the front of the door in the area provided Slide the door tabs 2 at the bottom of the door into the slots in the bottom the cabinet with door at suitable angle to cabinet surface Push the top of the door towards the cabinet until door studs 3 at bottom cabinet holes and door is fully closed the key into the lock and turn to lock the cabinet if locks used Other attach with screws Maximum screw torque 25 lb in 2.8 Nm