DSC HS2TCHP V1 2 - User Guide - EN FR DUT DEU

To download the full user manual and register your product please visit or scan the QR code to the right v1.2 Touchscreen User Manual tactile HS2TCHP v1.2 Manuel de l v1.2 Gebruiksaanwijzing aanraakscherm v1.2 Touchscreen Bedienungsanleitung This manual contains information on limitations regarding product use function and inform on the limitation as to liability of the manufacturer The entire manual should be carefully read EN GARDE Ce manuel contient des informations sur les limitations concernant l et le du produit ainsi que des informations sur les limitations et les obligations du fabricant attentivement le guide complet Deze gebruiksaanwijzing bevat informatie over beperkingen met betrekking tot het en de functionaliteit van dit product en informatie over beperkingen met betrekking tot de aans van de fabrikant Dieses Handbuch enth Informationen hinsichtlich der Einschr bei der Ver des Produkts und der Funktionen und Informationen zu den Einschr bez der Haf des Herstellers Notes Notes manual shall be used in conjunction with the applicable Neo 1.2 User Manual for the compatible alarm con panel models HS2016 HS2032 HS2064 E HS2128 E Refer to part 29009534 International or to part 29009530 North American ensure you obtain the latest version of the User Guide Updated versions of this User Guide are available contacting your distributor Read and save these instructions Follow all warnings and instructions specified within this document on the equipment Safety Instructions reduce the risk of fire electric shock and or injury observe the following Do not spill any type of liquid on the equipment Do not attempt to service this product yourself Opening or removing the cover may expose you to dan voltage or other risk Refer servicing to qualified service personnel Never open the device your Do not touch the equipment and its connected cables during an electrical storm there may be a risk of shock Do not use the Alarm System to report a gas leak if the system is near a leak Maintenance and Troubleshooting your HS2TCHP Touchscreen keypad in optimal condition by following all the instructions that are included this manual and or marked on the product Precautions not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to the display surface is contaminated breathe on the surface and gently wipe it with a soft dry cloth If not completely clean moisten cloth with isopropyl alcohol Do not use abrasives water thinners solvents or aerosol cleaners spray polish any aromatic solvents etc that may enter through holes in the HS2TCHP Touchscreen keypad and cause damage you may have a problem with your system If this happens your Alarm Controller will display an message Refer to the provided list when you see an error message on the display If additional help is contact your distributor for service This equipment HS2TCHP Touchscreen keypad shall be installed and used within an environment that the pollution degree max 2 and over voltages category II non hazardous locations indoor only It is to be installed serviced and or repaired by service persons only service person is defined as a person the appropriate technical training and experience necessary to be aware of hazards to which that person be exposed in performing a task and of measures to minimize the risks to that person or other persons There no parts replaceable by the end user within this equipment Never obstruct the access to the Alarm controller to which this equipment is connected These safety should not prevent you from contacting the distributor and or the manufacturer to obtain any further and or answers to your concerns 2 Start Start Arm Arm Alarms Troubles Test Time Date Chime Arms all interior and exterior sensors anywhere on the top banner of the home page Armed delay timer starts LED lights Top banner turns red and displays Stay Arm button LED lights Top banner turns red and displays Arms all exterior sensors Does not arm interior sensors Armed Deactivates all interior and exterior sensors anywhere on the top banner of the home page LED lights Top banner turns green and displays selected zones from activating the alarm when the system is armed Zone Status to display available zones then press the Bypass button a zone Bypass button changes to Unbypass Functions the button visible if an alarm has occurred button is displayed at the top right side of the screen View which zones have triggered alarms View system troubles the button visible if an alarm has occurred button is displayed at the top right side of the screen the keypad sounder siren status lights and backup battery User Functions Access Code System Test and siren activate for 2 seconds all lights turn on Ready Armed and lights flash for duration of test Adjusts the time and date displayed on the home page User Functions access code Time Date Press the section you to change e g Hrs then use the arrow keys to change the value Press are displayed in the top right corner of the home page the door chime function on off Chime On sounder emits 3 short beeps Chime icon displays a checkmark Adjusts the brightness and contrast of the touchscreen sounder emits 1 long beep Chime icon displays an X User Functions Access Code Keypad Config Display Options the sliders to increase or decrease the screen brightness brightness adjusts as the slider is moved Adjusts the level of the keypad buzzer screen Buzzer User Functions Access Code Keypad Config Buzzer Control the slider to increase or decrease the buzzer volume buzzer beeps at the selected volume level 3 1 Controls and Indicators HS2TCHP Touchscreen is an interactive touch sensitive color LCD that can be used on any PowerSeries Neo panel Due to the custom requirements of individual installations some of the features described here may differently than described Refer to your Installer Instructions for the details of your specific installation to the User Manual for general security system information ensure that your system continues to function as intended you must test it weekly Please refer to the System section in this manual If your system does not function properly call your installing company for system is capable of transmitting alarms troubles and emergency information to a central station If you ini an alarm by mistake immediately call the central station to prevent an unnecessary response Your System section provides additional information about how to use your alarm system Alarm Sounds system can generate 3 different alarm sounds Temporal pulsed siren Fire Alarm beeps 5 second pause 4 beeps Carbon Monoxide Alarm Continuous siren Intrusion Burglary Alarm The priority of signals is fire alarm carbon monoxide alarm and medical alarm then burglary alarm Medical alarm is silent It only results in an alarm transmission to the monitoring station Burglary Alarm Continuous Siren you are unsure of the source of the alarm approach with caution If the alarm was accidental your Access Code to silence the alarm Call your central station to avoid a dispatch 4 the Intrusion Alarm was Accidental Enter your Access Code to silence the alarm If the code is entered within 30s or the programmed value of alarm transmission delay the transmission of the alarm to the monitoring station will be canceled Call your central station to avoid a dispatch Alarm Pulsed Siren your emergency evacuation plan immediately the fire alarm was accidental e g burned toast bathroom steam etc enter your Access Code to silence the Call your central station to avoid a dispatch Ask your alarm company if your system has been equipped fire detection To reset the detectors see the Sensor Reset section Carbon Monoxide Alarm of your CO alarm indicates the pr