DSC LC-102-PIGBSS DSC Digital PIR and Glassbreak Detector with Pet Immunity

DSC Digital PIR and Glassbreak with Pet Immunity it a residential or commercial installation LC series of detection devices readies a security for the unexpected by providing protection every corner and corridor The combines proven digital PIR and detection technology with intelligent ASIC analysis Features alarm contact and tamper switch signal analysis profile design ABS plastic for shock and impact protection white light immunity immunity up to 25 kg 55 lbs Linear Imaging Technology for sharp analysis body dimensions and differentiation from and pets PIR and glassbreak sensitivity adjustment independent relay outputs for glassbreak and alarm signals ASIC based electronics your DSC distributor Digital PIR and Glassbreak with Pet Immunity Protection ASIC based processing provides both superior and false alarm rejection to help keep people and secure Quad Linear Imaging Technology provides analysis of body dimensions and differentiation from and pets Signal Processing motion detection is dependent on a sensor ability to intruders and provide true false alarm resistance The series of detection devices pinpoints intruders through signal processing Digital information is more accurately using software and is not subject to signal caused by amplification noise distortion or clipping and Easy Installation the detector is installed at the recommended height simply conduct a brief walk test make any adjustments and the unit is ready to perform visible LEDs can be viewed at a glance and help the identify the detection range from any distance or within the coverage pattern the Detector choosing a location for the detector be sure to consider following not aim the detector at reflective surfaces locations that are subject to direct high flow not locate the detector in the path of direct or sunlight not place next to large obstructions that may limit coverage area Range Adjustment detection range of the motion detector is adjustable to 3 m to 12 m 10 to 40 A potentiometer can be adjusted or counter clockwise to increase or decrease the respectively For optimum performance range should adjusted so that it effectively protects the dimensions of intended area The LC 102 PIGBSS is factory set for 57 Information Digital PIR and Glassbreak Detector with Pet Immunity Glassbreak Simulator by Pattern Mounting Simulator AFT 100 glassbreak simulator provides the most and accurate indication of the correct mounting for the detector Do not install the detector the maximum recommended range even if the simulator reports additional range Future in room acoustics could reduce any range 118 mm x 62.5 mm x 41 mm 4.65 x 2.46 x 1.61 97 gr 3.42 oz Method Quad Four Element PIR Input 8.2 to 16 VDC Draw Standby 18 mA Draw Active 25.5 mA Switch Contact Rating 0.1 Amp 28 VDC Protection 30 V m 10 1000 MHz Protection 50,000 V product information specifications and availability subject to without notice Certain product names herein may be trade names and or trademarks of other companies 2006