DSC LINKS2150 v1 31 - Installation Manual - English - Long Range Radio Communicator

Please refer to the System Installation Manual for information on limitations regarding product use and and information on the limitations as to liability of the manufacturer W A R N I N G Range Radio Transmitter 1.31 of Contents Programmable 1 Memory 1 Protection 1 1 1 2 the LINKS2150 2 the LINKS2150 2 the cabinet 2 diagram 2 Terminals 12v 2 Trouble Terminal 3 TRBL Input Terminal 3 TRBL Input Terminal 3 TRBL Output Terminal 3 and PGM PANEL Terminals 3 Terminal 3 and GRN KEYPAD Terminal 3 and Z1 to Z8 Terminals 3 OUT and V SUP Terminals 3 4 Operation 4 Display 4 Light 4 TRBL Terminal 4 THE LINKS2150 5 Data 5 10 System Configuration 5 Data Display 5 Programmed Data 5 Data Programming 5 PROGRAMMING SECTIONS 6 2150 Radio Account Code 6 Alarm Reporting Codes Zones 1 to 8 6 Restoral Reporting Codes Zones 1 to 8 6 PC 16 OUT Event Activation Codes 1 to 8 6 PC 16 OUT Event Activation Codes 9 to 16 7 PC 16 OUT Event Restoral Reporting 1 to 8 7 PC 16 OUT Event Restoral Reporting 9 to 16 8 Maintenance Alarm Reporting Codes 8 Maintenance Restoral Reporting Codes 8 System Configuration 9 Code 11 System Times 11 System Clock 11 System Date 11 Lockout Enable 11 Lockout Disable 11 Restore Factory Default Programming 11 DIAGRAM WORKSHEETS 2150 Radio Account Code 13 Alarm Reporting Codes Zones 1 to 8 13 Restoral Reporting Codes Zones 1 to 8 13 PC 16 OUT Event Activation Reporting 1 to 8 13 PC 16 OUT Event Activation Reporting 9 to 16 13 PC 16 OUT Event Activation Reporting 1 to 8 14 PC 16 OUT Event Restoral Reporting 9 to16 14 Maintenance Alarm Reporting Codes 14 Maitenance Restoral Reporting Codes 14 System Configuration 15 Code 15 System Times 15 System Clock 15 System Date 15 Lockout Enable 15 Lockout Disable 15 Restore Factory Default Programming 15 WARRANTY manual is for the LINKS2150 software version 1.31 Transmits alarm information to a long range radio network Features 8 alarm zones Varitech Transmission Format option Interfaces with DSC Control Panels and transmits codes for PC16 OUT events Supports DSC Control Panels Serial Output Option 8 positive or negative triggered zone inputs voltage trigger 4 to 14 VDC voltage trigger 0 to 0.8 VDC impedance 10kW zone loop resistance 100W 2 negaitve triggered trouble inputs voltage trigger 0 to 0.8 VDC Programmable LINKS2150 is complete with a default program and is with minimum programming The LINKS2150 completely keypad programmable Required power supply 11.5 to 14VDC at 1A Trouble Output 50mA Programmable with the DSC PC2550RK Keypad Radio transmitter frequency as specified on transmitter Antenna not supplied MHW 450 50W vertical antenna 470 MHz Cabinet dimensions high x 11.8 wide x 3.3 mm x 300 mm x 84 mm Cabinet colour light beige Memory LINKS2150 uses EEPROM memory which will retain program information even if AC and battery power is The EEPROM memory can be reprogrammed of times Protection LINKS2150 has been carefully designed and tested to reliable protection against static and lightning transients Our special circuit board catches high voltage transients right at the wiring and transient protection devices are placed in all areas to further reduce damaging voltages Low or disconnected external battery Loss of external AC power Security control panel connection supervision Long Range radio alarm transmitter Compatible with PC 16OUT functions on the PC1500 PC2525 PC2550 PC3000 Compatible with serial output functions on the PC2525 or later PC2550 v1.31 or later PC3000 v7.71 or and the PC4020CF V2.1 or later Ensure that the panel is equipped with the proper software to Section 10 on page 10 for 8 zone inputs for stand alone operation Capable of reporting PC 16 OUT Output Module events 4 LINKS2150 Trouble Reporting Codes and Test Reporting Code Programmable Test Transmission Time Programmable zone response time Inputs for external power supply trouble indications System Clock and Date Installer Lockout feature Programmed with the DSC PC2550RK LED keypad DO NOT connect both a and a LINKS2150 to the same system can connect both a PC5400 module and a LINKS2150 to same system the LINKS2150 the LINKS cabinet in a convenient location next to already installed security system control panel cabinet much as is reasonably possible the LINKS2150 should be located near sources of interference These include of electrical noise such as computers televisions electric motors in appliances and heating and air units as well as large metal objects like ducts and plumbing which may shield the antenna the cabinet must be located near such items the LINKS may have to be mounted on a remote bracket from the cabinet Whenever possible locate the as close as possible to the security system control panel the LINKS2150 the LINKS cabinet in a convenient location next to the installed security sys