DSC PC4937 5937 v1 0 - Installation Manual - English - Maxsys PowerSeries Intercom and Listen-In Expansion Module

1 On the front of the Maxsys PC4936 or Power Series PC5936 board press the three standoffs into the three holes where the PC4937 PC5937 is to be connected Align CON1 on the PC4937 PC5937 with CON1 on the Maxsys PC4936 or Power Audio Expansion Module Audio Expansion Module Audio Expansion Module Audio Expansion Module Audio Expansion Module Instructions PC5936 board Press the pins on the back of the PC4937 PC5937 into CON1 on the PC5936 Press the PC4937 PC5937 onto the three plastic standoffs on the Maxsys PC4936 Connect up to 8 audio stations to the PC4937 PC5937 terminals as described in Power Series PC5936 board PC5936 Installation Manual Once all wiring is complete apply power to the control panel Connect the battery to the battery then connect the AC transformer For more information on panel power specifications see the control panel Installation Manual Do not connect the power until all wiring is complete the Audio Interface Module your Maxsys PC4936 or Power Series PC5936 Installation Manual for complete instructions for the module and the audio ports Warranty Warranty Warranty Warranty Warranty Security Controls Ltd warrants that for a period of twelve months from the date of purchase the product shall be of defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty Security Controls Ltd shall at its option repair or replace the defective equipment upon return of the equipment its factory This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or or damage due to causes beyond the control of Digital Security Controls Ltd such as lightning excessive mechanical shock water damage or damage arising out of abuse alteration or improper application of the foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other warranties whether or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd This warranty contains entire warranty Digital Security Controls Ltd neither assumes responsibility for nor authorizes any other person purporting act on its behalf to modify or to change this warranty nor to assume for it any other warranty or liability concerning this product no event shall Digital Security Controls Ltd be liable for any direct or indirect or consequential damages loss of anticipated loss of time or any other losses incurred by the buyer in connection with the purchase installation or operation or of this product Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is possible this product to fail to perform as expected COMPLIANCE STATEMENT Changes or modifications not expressly approved by Digital Security Controls Ltd could void your authority to use this equipment generates and uses radio frequency energy and if not installed and used properly in strict accordance with the instructions may cause interference to radio and television reception It has been type tested and found to comply with the for Class B device in accordance with the specifications in Subpart of Part 15 of FCC Rules which are designed to provide protection against such interference in any residential installation However there is no guarantee that interference will not in a particular installation If this equipment does cause interference to television or radio reception which can be determined by the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Re orient the receiving antenna Relocate the alarm control with respect to the receiver Move the alarm control away from the receiver Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits necessary the user should consult the dealer or an experienced radio television technician for additional suggestions The user may find the booklet prepared by the FCC useful to Identify and Resolve Radio Television Interference Problems This booklet is available the U S Government Printing Office Washington D C 20402 Stock 004 000 00345 4 PC4937 PC5937 adds 8 audio ports to the Maxsys PC4936 or PowerSeries PC5936 interface module Current draw 5 mA Connect up to 8 audio stations interior or exterior Total current providing capability between AUX terminals 500 mA Input impedance at any microphone input 25k Maximum music input signal level amplitude 200 mV peak to peak PC4937 PC5937 package contains the following parts One PC4937 PC5937 board 3 plastic standoffs beginning to connect the unit ensure that all power AC transformer and battery disconnected from the control panel and from the Maxsys PC4936 or the PowerSeries module Digital Security Controls Ltd Canada Canada US only wwwwwwwwwwwwwww dsc com in Canada 29005810 R001 Expansion Module Please refer to the System Installation Manual information on limitations regarding product use and and information on the limitations as to liability of manufacturer On the front of the Maxsys PC4936 or Power Series PC5936 board press the three standoffs into the three holes where the PC4937 PC5937 is to be connected Align CON1 on the PC4937 PC5937 with CON1 on the Maxsys PC4936 or Power Audio Expansion Module Audio Expansion Module Audio Expansion Module Audio Expansion Module Audio Expansion Module Instructions PC5936 board Press the pins on the back of the PC4937 PC5937 into CON1 on the PC5936 Press the PC4937 PC5937 onto the three plastic standoffs on the Maxsys PC4936 Connect up to 8 audio stations to the PC4937 PC5937 terminals as described in Power Series PC5936 board PC5936 Installation Manual Once all wiring is complete apply power to the control panel Connect the battery to the battery then connect the AC transformer For more information on panel power specifications see the control panel Installation Manual Do not connect the power until all wiring is complete the Audio Interface Module your Maxsys PC4936 or Power Series PC5936 Installation Manual for complete instructions for the module and the audio ports Warranty Warranty Warranty Warranty Warranty Security Controls Ltd warrants that for a period of twelve months from the date of purchase the product shall be of defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty Security Controls Ltd shall at its option repair or replace the defective equipment upon return of the equipment its factory This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or or damage due to causes beyond the control of Digital Security Controls Ltd such as lightning excessive mechanical shock water damage or damage arising out of abuse alteration or improper application of the foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other warranties whether or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd This warranty contains entire warranty Digital Security Controls Ltd neither assumes responsibility for nor authorizes any other person purporting act on its behalf to modify or to change this warranty nor to assume for it any other warranty or liability concerning this product no event shall Digital Security Controls Ltd be liable for any direct or indirect or consequential damages loss of anticipated loss of time or any other losses incurred by the buyer in connection with the purchase installation or operation or of this product Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is possible this product to fail to perform as expected COMPLIANCE STATEMENT Changes or modifications not expressly approved by Digital Security Controls Ltd could void your authority to use this equipment generates and uses radio frequency energy and if not installed and used properly in strict accordance with the instructions may cause interference to radio and television receptio