DSC Power432 - Automatic Contact ID 432-632 rev 005

Automatic Contact ID Power432 PC1555MX Power632 Power432 and Power632 can generate automatic Contact ID reporting codes for central communication automatic Contact ID is a six step process Program the central station phone number Program the account number Program the communicator format Program the communicator call direction options Enable automatic Contact ID Program the reporting codes Sections 301 310 360 361 368 Communicator Call Direction Options 381 Communicator Option Code 320 353 Reporting Codes Number 1 Number Format Option 1 Program the Telephone Number the central station phone number in Section 301 2 Program the Account Number the account number in Section 310 Program a HEX digit A for any digit in the account number 3 Program the Communication Format data 03 in Section 360 for telephone number 1 4 Program the Communicator Call Direction Options Call Direction options are used to determine which events will be reported to phone number By default option 1 is ON in all Sections and all events will transmit using number 1 To disable the reporting of a group of codes i e openings and closings turn 1 OFF in the correct Section 361 Alarm Restoral 363 Tamper Alarm Restoral 365 Opening Closing 367 Maintenance Alarms Restoral 368 Test Transmission 5 Enable Automatic Contact ID enable automatic Contact ID turn Option 7 OFF in Section 381 6 Program the Reporting Codes panel will automatically transmit the correct Contact ID reporting code for all events if the code for the event is anything other than data 00 By default all reporting codes are as data FF which means the panel will report all possible events It is important to the reporting of unwanted events by programming data 00 for those events Tips 320 353 Reporting Codes the account number has a 0 in it program a HEX digit A press 1 Disable the reporting of any event by programming the reporting code as data 00 To disable groups of reporting codes i e openings and closings use the Call Direction Sections The Power832 does not support automatic Contact ID reporting Test Procedure and hold the Auxiliary keys A Upon successful transmission of the signal to the central the keypad will beep rapidly 10 times