DSC Power432 - Automatic SIA 432-832 rev 005

Automatic SIA Power432 PC1555MX Power632 PC5010 Power832 of the PowerSeries control panels can generate automatic SIA reporting codes for central communication automatic SIA is a six step process Program the central station phone number Program the account number Program the communicator format Program the communicator call direction options Enable automatic SIA Program the reporting codes Sections 301 310 360 361 368 Communicator Call Direction Options 381 Communicator Option Code 320 353 Reporting Codes Number 1 Number Format Option 1 Program the Telephone Number the central station phone number in Section 301 Do not program a HEX digit A for any digit in the account number Program a 0 2 Program the Account Number the account number in Section 310 3 Program the Communication Format data 04 in Section 360 for telephone number 1 4 Program the Communicator Call Direction Options Call Direction options are used to determine which events will be reported to phone number By default option 1 is ON in all Sections and all events will transmit using number 1 To disable the reporting of a group of codes i e openings and closings turn 1 OFF in the correct Section 361 Alarm Restoral 363 Tamper Alarm Restoral 365 Opening Closing 367 Test Transmission 368 Maintenance Alarms Restoral 5 Enable Automatic SIA enable automatic SIA turn Option 3 OFF in Section 381 6 Program the Reporting Codes panel will automatically transmit the correct SIA reporting code for all events if the reporting for the event is anything other than data 00 By default all reporting codes are as data FF which means the panel will report all possible events It is important to the reporting of unwanted events by programming data 00 for those events Tips 320 353 Reporting Codes Disable the reporting of any event by programming the reporting code as data 00 To disable groups of reporting codes i e openings and closings use the Call Direction When using automatic SIA all the reporting codes will be sent using the account number Sections in Section 310 Test Procedure and hold the Auxiliary keys A Upon successful transmission of the signal to the central the keypad will beep rapidly 10 times