DSC Power864 - Automatic Contact ID 864 rev 005

Automatic Contact ID Power864 Power864 can generate automatic Contact ID reporting codes for central station automatic Contact ID is a seven step process Program the central station phone number Program the system account number Program the partition account numbers Program the communicator format Program the communicator call direction options Enable automatic Contact ID Program the reporting codes Sections 301 310 311 318 350 351 376 Communicator Call Direction Options 381 Communicator Option Code 320 349 Reporting Codes Number 1 Account Number Account Number Format Option 1 Program the Telephone Number the central station phone number in Section 301 2 Program the System Account Number the system account number in Section 310 Program a HEX digit A for any digit in the account number 3 Program the Partition Account Numbers the partition 1 to 8 account number in Section 311 318 Program a HEX digit A for any digit in the account number 4 Program the Communication Format data 03 in Section 350 for telephone number 1 5 Program the Communicator Call Direction Options Call Direction options are used to determine which events will be reported to phone number By default option 1 is ON in all Sections and all events will transmit using number 1 To disable the reporting of a group of codes i e openings and closings turn 1 OFF in the correct Section 351 358 359 366 367 374 Opening Closing for Partitions 1 8 375 376 Alarms Restorals Transmission for Partitions 1 8 Alarm Restoral for Partitions 1 8 6 Enable Automatic Contact ID enable automatic Contact ID turn Option 7 OFF in Section 381 7 Program the Reporting Codes panel will automatically transmit the correct Contact ID reporting code for all events if the code for the event is anything other than data 00 By default all reporting codes are as data FF which means the panel will report all possible events It is important to the reporting of unwanted events by programming data 00 for those events Tips 320 349 Reporting Codes the account number has a 0 in it program a HEX digit A press 1 Disable the reporting of any event by programming the reporting code as data 00 To disable groups of reporting codes i e openings and closings use the Call Direction Sections The Power 832 does not support automatic Contact ID reporting Test Procedure and hold the Auxiliary keys A Upon successful transmission of the signal to the central the keypad will beep rapidly 10 times