DSC Power864 - Automatic SIA 864 rev 005

Automatic SIA Power864 PowerSeries control panels can generate automatic SIA reporting codes for central station automatic SIA is a six step process Program the central station phone number Program the system account number Program the communicator format Program the communicator call direction options Enable automatic Contact ID Program the reporting codes Sections 301 310 350 351 376 Communicator Call Direction Options 381 Communicator Option Code 320 349 Reporting Codes Number 1 Account Number Format Option 1 Program the Telephone Number the central station phone number in Section 301 2 Program the System Account Number the system account number in Section 310 a 4 digit account number is required program the last 2 digits as FF For to program account number 1234 program data 1234FF Do not program a HEX digit A for any digit in the account number Program a 0 All reporting codes will be sent with the System Account Number 3 Program the Communication Format data 04 in Section 350 for telephone number 1 4 Program the Communicator Call Direction Options Call Direction options are used to determine which events will be reported to phone number By default option 1 is ON in all Sections and all events will transmit using number 1 To disable the reporting of a group of codes i e openings and closings turn 1 OFF in the correct Section 351 358 359 366 367 374 Opening Closing for Partitions 1 8 375 376 Alarms Restorals Transmission for Partitions 1 8 Alarm Restoral for Partitions 1 8 5 Enable Automatic SIA enable automatic SIA turn Option 3 OFF in Section 381 6 Program the Reporting Codes panel will automatically transmit the correct Contact ID reporting code for all events if the code for the event is anything other than data 00 By default all reporting codes are as data FF which means the panel will report all possible events It is important to the reporting of unwanted events by programming data 00 for those events Tips 320 349 Reporting Codes Disable the reporting of any event by programming the reporting code as data 00 To disable groups of reporting codes i e openings and closings use the Call Direction Sections When using automatic SIA all the reporting codes will be sent using the account number in Section 310 a 4 digit account number is required program the last 2 digits of the System Account as FF For example to program account number 1234 program data Test Procedure and hold the Auxiliary keys A Upon successful transmission of the signal to the central the keypad will beep rapidly 10 times