DSC Power864 - Program access codes 864 rev 005
File Preview
Click below to download for free
Click below to download for free
File Data
Name | dsc-power864-program-access-codes-864-rev-005-1685970234.pdf |
---|---|
Type | |
Size | 645.94 KB |
Downloads |
Text Preview
Programming Access Codes Power864 are 37 different access codes available There are 32 user codes 2 duress codes one code and 2 partition master codes user codes is a five step process Enter the 5 menu Enter the User Code number Program the User Code Assign the User Code to a Partition Assign the User Code Attributes 1 Enter Access Code Programming enter Access Code Programming perform the following 5 Master Code Access Code Programming keypads will turn ON the appropriate LED if the user code is programmed LCD5500Z will indicate which codes are programmed by displaying the letter beside each keypads will flash the number of all access codes programmed 2 Enter the Access Code Number the Access Code Number 32 34 42 User Codes Codes Code Master Codes 3 Program the Access Code the new four digit code To delete a code press the key instead of entering a 4 digit code 4 Assign the Access Code to a Partition assign a user to a partition enter 42 to access code partition assignment code number on or off the appropriate option or LCD5501 keypad keypad 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 enable disable 2 enable disable 3 enable disable 4 enable disable 5 enable disable 6 enable disable 7 enable disable 8 eanble disable 1 enable disable 2 enable disable 3 enable disable 4 enable disable 5 enable disable 6 enable disable 7 enable disable 8 enable disable 5 Assign User Codes Attributes User Code has attributes assigned to it assign attributes to a User Code enter 42 to access code attributes Code number on or off the appropriate option or LCD5501 keypad keypad 3 4 7 Bypass enable disable enable disable Squawk enable disable Bypass Access Squawk Bypass enable disable Access enable disable Squawk enable disable finished program access code attributes press to exit Attributes 1 2 5 6 and 8 are for future use After the attributes are programmed for the user code and is pressed the will go back to regular access code programming Tips By default all access codes will be assigned to Partition 1 and Partition 2 To arm and disarm a Partition ensure that keypad is assigned to that partition Test each access code can arm and disarm the system