DSC PowerSeries User Manual PC1616 PC1832 PC1864
File Preview
Click below to download for free
Click below to download for free
File Data
Name | dsc-powerseries-user-manual-pc1616-pc1832-pc1864-6537190824.pdf |
---|---|
Type | |
Size | 2.21 MB |
Downloads |
Text Preview
WARNING This manual contains information on limitations regarding product use and function and on the limitations as to liability of the manufacturer The entire manual should be carefully read Manual in Telephone Company Equipment or Facilities Telephone Company may make changes in its facilities equipment operations or pro that could affect the operation of the equipment If this happens the Telephone Com will provide advance notice in order for you to make necessary modifications to uninterrupted service Maintenance Facility trouble is experienced with this equipment PC580 PC1555MX PC1616 PC1832 PC5010 PC5015 or the PC5020 for repair or warranty information contact the indicated below If the equipment is causing harm to the telephone network the Tel Company may request that you disconnect the equipment until the problem is solved equipment is of a type that is not intended to be repaired by the end user c o APL Logistics 757 Douglas Hill Rd Lithia Springs GA 30122 Information to party line service is subject to state tariffs Contact the state public utility com public service commission or corporation commission for information dialing equipment must be able to seize the telephone line and place a call in an emer situation It must be able to do this even if other equipment telephone answering sys computer modem etc already has the telephone line in use To do so alarm dialing must be connected to a properly installed RJ 31X jack that is electrically in series and ahead of all other equipment attached to the same telephone line Proper installation depicted in the figure below If you have any questions concerning these instructions you consult your telephone company or a qualified installer about installing the RJ 31X and alarm dialing equipment for you Premises Equipment and Wiring Dialing Jack Machine Jack COMPLIANCE STATEMENT Changes or modifications not expressly approved by Digital Security Con could void your authority to use this equipment equipment has been tested and found to comply with the limits for a Class B digital de pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable against harmful interfer ence in a residential installation This equipment gener uses and can radiate radio frequency energy and if not installed and used in accordance the instructions may cause harmful interference to radio communications However is no guarantee that interference will not occur in a particular installation If this equip does cause harmful interference to radio or television reception which can be deter by turning the equipment off and on the user is encouraged to try to correct the inter by one or more of the following measures Re orient the receiving antenna Connect the equipment into an outlet on a circuit different from that to which the the separation between the equipment and receiver is connected Consult the dealer or an experienced radio television technician for help user may find the following booklet prepared by the FCC useful How to Identify and Radio Television Interference Problems This booklet is available from the U S Printing Office Washington D C 20402 Stock 004 000 00345 4 keypads represented in this manual can be used with the following Control Units PC1555MX PC1616 PC1832 PC1864 PC5010 PC5015 or the PC5020 INFORMATION equipment complies with Part 68 of the FCC Rules and if the product was approved 23 2001 or later the requirements adopted by the ACTA On the side of this equip is a label that contains among other information a product identifier If requested number must be provided to the Telephone Company F53AL01BPC1614 Product Identifier F53AL01BPC1832 Product Identifier F53AL01BPC1864 Product Identifier REN 0.0B Product identifier Product identifier REN 0.1B REN 0.1B FCC Registration REN 0.6B FCC Registration FCC Registration REN 0.1B Jack RJ 31X Connection Requirements plug and jack used to connect this equipment to the premises wiring and telephone net must comply with the applicable FCC Part 68 rules and requirements adopted by the A compliant telephone cord and modular plug is provided with this product It is to be connected to a compatible modular jack that is also compliant See instal instructions for details Equivalence Number REN REN is used to determine the number of devices that may be connected to a telephone Excessive RENs on a telephone line may result in the devices not ringing in response an incoming call In most but not all areas the sum of RENs should not exceed five To be certain of the number of devices that may be connected to a line as determined the total RENs contact the local Telephone Company For products approved after July 2001 the REN for this product is part of the product identifier that has the format US The digits represented by are the REN without a decimal point 03 is a REN of 0.3 For earlier products the REN is separately shown on the label of Harm this equipment PC580 PC1555MX PC1616 PC1832 PC1864 PC5010 PC5015 or causes harm to the telephone network the telephone company will notify you in that temporary discontinuance of service may be required But if advance notice is practical the Telephone Company will notify the customer as soon as possible Also you be advised of your right to file a complaint with the FCC if you believe it is necessary product is in conformity with EMC Directive 89 336 EEC based on results using harmo standards in accordance with article 10 5 R TTE Directive 1999 5 EC based on fol Annex III of the directive and LVD Directive 73 23 EEC as amended by 93 68 EEC on results using harmonized standards product meets the requirements of Class II Grade 2 equipment as per EN 50131 1 2004 This product is suitable for use in systems with the following notification options A use of two warning devices and internal dialer required B self powered warning device and internal dialer required D use of DSC model T Link TL250 encrypted Ethernet communicator required STATEMENT product meets the applicable Industry Canada technical specifications The Ringer Number is an indication of the maximum number of devices allowed to be con to a telephone interface The termination on an interface may consist of any combina of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five The Ringer Equivalence Number REN for PC580 PC1555MX PC1832 PC1864 PC5010 PC5015 and the PC5020 is 0.1 appareil num de la classe B respecte toutes les exigences du R sur le brouilleur du Canada L d de la sonnerie IES assign chaque terminal indique le nombre maximal de terminaux qui peuvent raccord une t La terminaison d interface peut consister en une combinaison de dispositifs la seule condition que la somme d d de la de tous les dispositifs n pas 5 L d de la sonnerie IES du PC1555MX PC1616 PC1832 PC1864 PC5010 PC5015 e PC5020 est de 0.1 of Contents System Keypads 1 1 2 Display Symbols 3 4 Sheets Codes 4 Information 4 Zone Information 5 Your Security System 6 Detection