DSC SG Rack Mount Kit - Install Guide

SG Rackmount Kit Installation Guide For use with Standard 1U Sur Gard Receivers SG Rackmount Kit provides a simple conversion of the SG desktop receiver to a 19 equipment rack configuration This installation sheet must be used with the Installation Guide List Strips 2 per side Qty 4 Brackets Qty 2 Bracket Screws Qty 8 the SG desktop receiver from power source and other equipment Remove the four screws securing the rear panel to the chassis Slide front panel forward to remove from chassis the 4 Tap Strips in the slots indicated 2 per side Tap strips have multiple taps for simple customization the 4 screws removed in step 2 Slide front panel back into chassis Secure the 2 brackets flush to the rear of the chassis with the screws provided the SG desktop receiver from the rear of the rack not supplied Secure the desktop receiver with rack compatible screws Reconnect cabling and power source as required Verify unit is operational refer to the specific unit Installation Guide 2008 Digital Security Controls Canada in Canada