DSC Spec Sheet - LC-103-104 Detector Anti-Masking

DSC LC Series of Detection Devices and Microwave Detector with and Pet Immunity LC 104 PIMW Features That Make a Difference Anti masking Form Digital Pet Quad Microwave Unique Advanced Height User friendly it a residential or installation the series of detection devices a security system for unexpected by providing for every room and corridor LC 103 PIMSK and are dual motion detectors combine passive infrared microwave detection with immunity The LC 103 PIMSK has support for anti masking anti masking feature prevents intruders from defeating the detector covering its field of view your DSC distributor 1 888 888 7838 and accessories Protection ASIC based processing provides both superior and false alarm rejection to help keep people possessions secure Quad Linear Imaging Technology sharp analysis of body dimensions and from backgrounds and pets Signal Processing motion detection is dependent on a sensor to identify intruders and provide true false alarm The LC series of detection devices pinpoints through digital signal processing Digital is more accurately analyzed using software is not subject to signal degradation caused by noise distortion or signal clipping LC 103 PIMSK LC 103 PIMSK detector features PIR and microwave The microwave sensor features two channels for microwave MW detection and the other for detection The anti masking feature works sensing objects or barriers that may block the detector of view at a distance of 2.62 0.8 m and closer If field of view of the detector is intentionally obscured an intruder the dedicated anti masking output opens from NC to NO and remains in this status until PIR sensor is activated Immunity accurate sensors are able to provide quality while at the same time ignoring pets weighing up 55 lbs 25 kg the Detector choosing a location for the detector be sure to the following Do not aim the detector at reflective surfaces Avoid locations that are subject to direct high air flow Do not locate the detector in the path of direct or Do not place next to large obstructions that may limit sunlight coverage area and Easy Installation the detector is installed at the recommended height simply conduct a brief walk test make any adjustments and the unit is ready to perform visible LEDs can be viewed at a glance and help the identify the detection range from any distance or within the coverage pattern Range Adjustment detection range of the motion detector is adjustable about 10 to 49 3 m to 15 m A potentiometer can adjusted clockwise or counter clockwise to increase decrease the range respectively For optimum range should be adjusted so that it protects the dimensions of the intended area Microwave frequencies can penetrate walls and Adjust range so that it does not extend outside the area of detection Pattern 4.65 x 2.46 x 1.61 mm x 62.5 mm x 41 mm 102 gr 3.6 oz Method Quad Four Element PIR Pulse Doppler Input 9.6 to 16 VDC Draw Standby 20 mA Draw Active 25 mA Switch Contact Rating 0.1 Amp 28 VDC Protection 10 V m plus 80 AM from 80 1000 MHz and accessories product information specifications and availability subject to change without Certain product names mentioned herein may be trade and or registered trademarks of other companies 2013 12