DSC TL300 Spec

30000245TL300Spec qxd 10 28 05 10 07 AM Page 1 T Link Universal IP Communicator T Link universal IP alarm communicator TL300 is a addition to the T Link family of Internet network communicators Capable of communicating with control panel including third party manufacturers uses the Contact ID format the simple to install saves end users money by taking advantage of existing IP networks and security equipment to fully supervised security solutions between premises and central monitoring stations This provides flexibility and an always on two way of communication The TL300 communication stream small and requires only a limited amount of network This ensures that the integrity of the data transferred never becomes compromised To security risks the module utilizes industry 128 bit AES encryption polling and hardware protection your DSC distributor Features with any control panel that uses the Contact ID format always on IP communication over local LAN WAN network or the Internet AES encryption NIST approved DHCP dynamic IP addresses events to 2 different receiver IP addresses and hardware substitution protection network bandwidth requirements with 10 100BaseT networks on board programmable zone inputs expandable to 12 using zone expander module programmable voltage outputs through the panel keypad or T Link Console software AA High Line Security ULC Level 3 4 5 and CE listed 10 28 05 10 07 AM Page 2 T Link Universal IP Communicator it Works TL300 connects directly to the telephone output of a control and simulates a telephone connection providing a TCP IP that sends predefined Contact ID codes to the central station Added ensure dependable and timely event notification the TL300 is of reporting to two different receiver IP addresses feature that allows communication to continue in the one of the IP addresses is inaccessible The module can be programmed to communicate events to two different addresses These e mail addresses can be associated with personal computer pager enabled mobile phone or PDA the TL300 can be accomplished locally using the DSC keypad or the T Link Console software over the IP network made directly to the communicator Ethernet port interfacing to the module four on board programmable zone the TL300 can be configured to operate as a stand alone for interfacing existing third party control equipment two way communication with the TL300 and the Sur Gard III receiver IP line card the SG DRL3 IP allows for alarm as well as remote diagnostics Communication TL300 utilizes industry leading 128 bit AES encryption polling substitution protection and application specific hardware help eliminate security risks the module communication stream is minimal and draws small amounts of network bandwidth data transfer remains and accurate Information TL300 Universal IP Alarm Communicator Zone Expander Module by TL300 is compatible with any control panel via Ring and Tip connection that uses the Contact ID and follows the Contact ID specifications of ms 60 ms on off time trigger inputs of the TL300 can be controlled outputs on any control panel station IP receiver Sur Gard System III with SG DRL3 IP line card refer to applicable manuals for further details 3.25 x 5.25 83 mm x 133 mm Voltage 12 VDC Draw 250 mA 275 mA with PGM or PC5108 Environment 32 to 120 F 0 to 49 C Humidity 5 to 93 product information specifications and availability subject to without notice Certain product names herein may be trade names and or trademarks of other companies 2005