DSC User Manual - PC1404 - v1 1
File Preview
Click below to download for free
Click below to download for free
File Data
Name | dsc-user-manual-pc1404-v1-1-8127096345.pdf |
---|---|
Type | |
Size | 2.26 MB |
Downloads |
Text Preview
PC1404 v1.1 Manual This manual contains information on limitations regarding product use function and information on the limitations as to liability of the manufacturer The entire should be carefully read of Contents Your Security System 1 Monoxide Detection must be enabled by your Installer 1 Detection 1 1 1 1 System Operation 1 Keypads 2 Display Symbols 3 NOTICE 4 Keypads 4 Language Selection 4 and Disarming the System 4 the System 4 Arming Methods 5 Arming 5 Arming 5 Arming 6 Without Entry Delay 6 Arm 6 Arming 6 Exit 6 the System 6 Codes 7 An Alarm Sounds 8 Alarm 8 Alarm 8 Keys 8 Access Codes 8 Memory 10 Chime Entry Exit Beeps 10 Code Programming 11 Codes 11 Code Attributes 11 Codes 12 Zones 13 Trouble Conditions 14 the System Date and Time 15 Enable 15 Alarm Operation 15 Function Commands 16 Brightness Contrast 17 the Buzzer Level 17 the Event Buffer from a PK5500 Keypad 17 Reset 17 Information 18 Codes 18 Your System 20 Test 20 System Test 20 Computer Access To Your System 20 for Locating Smoke Detectors and CO Detectors 21 Monoxide Detectors 22 Fire Safety Audit 22 Escape Planning 22 Safety Instructions for User When using equipment connected to the TELEPHONE NETWORK there are basic instructions that should always be followed Refer to the SAFETY INSTRUCTIONS pro with this product save them for future reference The INSTALLER will instruct you regard the safety precautions that shall be considered during the use of this equipment order to reduce the risk of fire electric shock and or injury to the persons several basic safety shall be considered as follows NEVER SPILL LIQUID OF ANY KIND ON THE EQUIPMENT NEVER OPEN THE DEVICE YOURSELF DO NOT ATTEMPT TO SERVICE THIS PRODUCT YOURSELF OPENING OR REMOVING COVERS MAY YOU TO DANGEROUS VOLTAGES OR OTHER RISKS REFER SERVICING TO SERVICE PER ONLY Service Person is defined as a person having appropriate technical training and experi necessary to be aware of hazards to which that person may be exposed in performing a task of measures to minimize the risks to that person or other persons AVOID TOUCHING THE EQUIPMENT AND ITS CONNECTED CABLES DURING AN ELECTRICAL THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING DO NOT USE THE ALARM CONTROLLER TO REPORT A GAS LEAK IF IT IS IN THE VICINITY OF THE MAINTENANCE AND TROUBLESHOOTING can keep your Alarm Controller in optimum conditions by following all the instructions that included within this leaflet The enclosure should be cleaned by wiping with a damp cloth only DO NOT use abrasives thinners solvents or aerosol cleaners spray polish that may enter through in the enclosure case of the Alarm Controller and cause damage DO NOT use any water or any other liquid DO NOT wipe the front cover with alcohol It may damage it you may have a problem with your Alarm Controller or telephone line If this hap your Alarm Controller usually identifies the problem and displays an error message Refer the provided list when you see an error message on the display If additional help is needed contact your distributor for service the used batteries shall be disposed of as per the local rules and or regulations Your Security System DSC Security System has been designed to provide you with the greatest possible flexibility and Read this manual carefully and have your installer instruct you on your system and on which features have been implemented in your system All users of this system be equally instructed in its use Fill out the Information