DSC VPM-1 - Installation Manual - English - ClassicSeries Escort

INSTALLATION INSTRUCTIONS Compatible with PC2525 version 1.0 and later PC2550 version 1.2 and later and PC3000 7.6 and later control panels Operates panel from any tone dialing telephone Provides on premises or outside dial up access English voice prompts Single circuit board for easy installation Voltage 10 to 16 VDC Current 30 mA 13.8 volts 100 mA 13.8 volts Dimensions Overall 7.875 x 3.350 inches 200 mm x 83 mm Mounting Adhesive stand offs supplied or PC4003C cabinet stand offs supplied Shipping Weight 11 ounces 300g the Escort circuit board inside the control unit cabinet with adhesive stand offs Ensure that is adequate clearance between the Escort circuit board and other circuit boards heat sinks and wiring there is any doubt of adequate clearance use a PC4003C cabinet to mount the Escort outside the panel cabinet the Escort to the control panel and telephone connector using quad cable or other suitable as shown in the wiring diagram The Escort operates from the keypad power supply Ensure that the total current used by both keypads including the Escort and devices connected to the AUX supply does not exceed the in the control panel Installation Manual Escort module is not programmable CONTROL PANEL following sections must be programmed as shown to ensure proper operation of the Escort 09 2nd System Option Code ON Zone Light 4 Code must be used to abort Auto Arm 09 2nd System Option Code OFF Zone Light 8 Bypassed zones must not be displayed when armed CONTROL PANEL following sections must be programmed as shown to ensure proper operation of the Escort 17 3rd System Option Code ON Zone Light 4 Code must be used to abort Auto Arm 18 4th System Option Code OFF Zone Light 3 Bypassed zones must not be displayed when armed CONTROL PANEL following sections must be programmed as shown to ensure proper operation of the Escort 51 3rd System Option Code ON Zone Light 2 Code must be used to abort Auto Arm SECURITY CONTROLS LTD Toronto Canada www dsc com R3 UP Escort module contains voice messages for every keypad controlled option available for the panel These prompts are activated when the Escort receives the corresponding digital If an option has not been used on the system the Escort will not provide a prompt for it the Escort has been installed enter the keypad commands for each option on the system to the appropriate message available to the system users the user on the proper use of the optional features of the system LEVEL ADJUSTMENT volume control for the voice messages is located on the Escort circuit board When testing set the to provide a normal voice level SECURITY CONTROLS LTD Toronto Canada cid 127 www dsc com R3