DSC WLS904P-433 - Installation Manual - English - Wireless Pet-Immune Passive Infrared Motion Detector

Battery Installation Installation Installation Installation Installation system is designed to work with Eveready Alkaline Energizer system is designed to work with Eveready Alkaline Energizer This system is designed to work with Eveready Alkaline Energizer system is designed to work with Eveready Alkaline Energizer system is designed to work with Eveready Alkaline Energizer Do not install any other type The reliability of the security system on its batteries and name or generic brand batteries may provide the best quality and dependability Use fresh batteries Most batteries have a before date printed on packaging or on the batteries themselves Buy batteries that have a before date of two years or more from your purchase date When disposing of used batteries follow the instructions and precautions on the batteries Many cities and communities have collection sites services for used household batteries Contact your municipal offices for on the disposal of used batteries the motion detector from its mounting plate by holding the sensor by sides and pushing up Install four fresh Eveready Alkaline Energizer AAA Be sure to insert the batteries in proper orientation Replace the sensor its mounting plate making sure it snaps place all the batteries are installed the will take 60 seconds to warm up this time the LED will flash slowly COMPLIANCE STATEMENT Changes or modifications not expressly approved by Digital Security Controls Ltd could void your authority to use equipment This equipment generates and uses radio frequency energy and if not installed and used properly in strict with the manufacturer instructions may cause interference to radio and television reception It has been type tested found to comply with the limits for Class B device in accordance with the specifications in Subpart of Part 15 of FCC which are designed to provide reasonable protection against such interference in any residential installation However is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to or radio reception which can be determined by turning the equipment off and on the user is encouraged to try to the interference by one or more of the following measures Re orient the receiving antenna Relocate the alarm control with respect to the receiver Move the alarm control away from the receiver Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits necessary the user should consult the dealer or an experienced radio television technician for additional suggestions user may find the following booklet prepared by the FCC helpful to Identify and Resolve Radio Television Problems This booklet is available from the U S Government Printing Office Washington D C 20402 004 000 00345 4 Warranty Warranty Warranty Warranty Warranty Security Controls Ltd warrants that for a period of twelve months from the date of purchase the product shall be free defects in material and workmanship under normal use and that in fulfilment of any breach of such warranty Digital Controls Ltd shall at its option repair or replace the defective equipment upon return of the equipment to its repair This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or handling damage due to causes beyond control of Digital Security Controls Ltd such as lightning excessive voltage mechanical water damage or damage arising out of abuse alteration or improper application of the equipment foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other warranties express or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd This warranty the entire warranty Digital Security Controls Ltd neither assumes nor authorizes any other person purporting to act on behalf to modify or to change this warranty nor to assume for it any other warranty or liability concerning this product no event shall Digital Security Controls Ltd be liable for any direct indirect or consequential damages loss of anticipated loss of time or any other losses incurred by the buyer in connection with the purchase installation or operation or of this product Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis Digital Security Controls Ltd recommends that the entire system be completely tested on a regular basis despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is for this product to fail to perform as expected for this product to fail to perform as expected for this product to fail to perform as expected for this product to fail to perform as expected for this product to fail to perform as expected Digital Security Controls Ltd Canada www dscgrp com in Canada 29005105 R001 Motion Detector INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS WLS904P is designed to combine the convenience of a wireless with effective and reliable detection of human motion as well as protection against the nuisance alarms associated with pets weighing to 60 lbs 27.3 kg The Detector The Detector The Detector The Detector The Detector provides effective immunity to single or multiple pets whose total weight does not exceed 60 lbs 27.3kg when installed and in the following manner a detector location that will provide the coverage required and will allow detector to be mounted a minimum of 6 ft 1.95m high and not higher ft 2.3m recommended ft 2.3m recommended 10ft 3m 7 ft 2.3m recommended ft 2.3m recommended ft 2.3m recommended the following to avoid false alarms the following to avoid false alarms the following to avoid false alarms the following to avoid false alarms the following to avoid false alarms Do not aim the detector at a stairwell to which a pet has access to Do not place furniture or objects higher than 3ft 0.9m which a pet can onto e g a cat on a couch closer than 10ft 3m from the detector Mount the detector flat on a wall or in a corner Do not angle it or use mounting brackets with this detector when it is used conjunction with pets Do not aim the detector at reflective surfaces such as mirrors or as this may distort the coverage pattern or reflect sunlight onto the detector Avoid locations that are subject to direct high air flow such as near an duct outlet Do not locate the detector near sources of moisture such as steam or oil Do not limit the coverage by large obstructions in the detection area as plants or cabinets detector should be mounted without first performing a module detector should be mounted without first performing a module detector should be mounted without first performing a module detector should be mounted without first performing a module detector should be mounted without first performing a module test to determine that it is in range of the wireless receiver test to determine that it is in range of the wireless receiver test to determine that it is in range of the wireless receiver test to determine that it is in range of the wireless receiver test to determine that it is in range of the wireless receiver the Placement T the Placement T instructions in the Instruction Sheet for your instructions in the Instruction Sheet for your the Placement Test instructions in the Instruction Sheet for your instructions in the Instruction Sheet for your the Placement T the Placement T instructions in the Instruction Sheet for your