Edwards 2315 2317 Installation Instruction

Caution Locate the magnet away from manual and latches to prevent it from being used a foothold or handle to close the door Use the existing roller track bolts to the switch without using the L Bracket as in Figure 3 Series Door Magnetic Contact 2315A 2317A Instructions Slide the slot of the switch over the beveled edge of L bracket and snap it tightly into place as shown in 1 Screw down firmly 1 Align the magnet with the switch and use screws to it to the door as shown in Figure 2 The switch magnet must be aligned within 1 2 inch of each to prevent false alarms 3 Connect the switch wires to the alarm system and test to proper operation The contact should be mounted at 13 inches from the floor If other track devices interfere mount the switch under 1 to 1 2 spacing magnet can be attached at different elevations from door standard 2 roller tracks for overhead 2 2 4 1.5 3.8cm 2.4 6.1cm contact shall be a hermetically sealed reed switch nomi 3.07 H x 1.80 W x 2.60 D with actuating magnet and magnet shall be in extruded aluminum type Contact shall be sealed in GE Interlogix exclusive potting compound Mounting bracket shall be with contact Contacts shall be specified as GE part numbers 2315A and 2317A Contact is de for installation on metal overhead door tracks Specifications A 2315A C 2317A AC DC max A max W max AC DC max A max W max Specifications A 2315A Form C 2317A max max Union Specifications A 2315A AC DC max max Each electrical rating is an maximum and cannot be Functions C 2317A Color Loop N O Loop N C Information Type Distance Type or closed stainless steel armored cable stainless steel armored cable UL US UL US to 3 to 3 distances are nominal make distance Gap specifications are for switch to make Break distance is approximately 1.1 1.5 times make SW Leveton Drive OR 97062 Canada 800 336 4206 Service 800 454 2363 800 483 2495 Second Street North St Paul MN 55109 651 777 2690 Rev B 09 03 in Taiwan Interlogix