EST EST3 v1 0 Smoke Management Application Manual

EST3 Management Manual Rev 1.0 28JUL99 Manuals Online BY NOTICE Systems Technology Parkland Drive FL 34243 739 4200 1999 Edwards Systems Technology Inc manual is copyrighted by Edwards Systems Technology EST You may not reproduce translate transcribe or any part of this manual without express written from EST manual contains proprietary information intended for to authorized persons or companies for the sole of conducting business with EST If you distribute any contained in this manual to unauthorized persons have violated all distributor agreements and may be subject legal action is a trademark of International Business Machines is a trademark of Microsoft Corporation Mouse is a trademark of Microsoft Corporation is a registered trademark of International Business Corporation is a trademark of Western Digital Corp and Windows 95 are trademarks of Microsoft manual was designed and written by the EST Technical Documentation Department Sarasota HISTORY for change release Manuals Online 1 2 3 4 fire geometry and smoke movement 1.1 to the fire problem 1.2 of combustion 1.4 of smoke control 1.14 of systems 1.18 system components 1.36 reading 1.51 smoke control system hardware 2.1 EST3 smoke control system 2.2 smoke control system design considerations 2.5 2.14 2.32 Annunciator Panel 2.41 current requirements 2.47 diagrams 2.48 system programming 3.1 smoke control 3.2 objects labels and rules 3.4 a labeling plan 3.6 considerations and sequencing 3.8 for smoke control programming 3.11 example 3.15 and system control examples 3.18 acceptance and testing 4.1 4.2 panel acceptance test procedure 4.3 acceptance testing 4.13 input modules 4.15 output modules 4.16 systems 4.17 considerations 4.21 Y 1 Smoke Management Application Manual Manuals Online information of liability product has been designed to meet the requirements of Standard 72 1996 Edition Underwriters Laboratories Standard 864 7th Edition and Underwriters Laboratories Canada Inc Standard ULC S527 Installation in accordance this manual applicable codes and the instructions of the Having Jurisdiction is mandatory EST shall not under circumstances be liable for any incidental or consequential arising from loss of property or other damages or losses to the failure of EST products beyond the cost of repair or of any defective products EST reserves the right to product improvements and change product specifications any time every precaution has been taken during the preparation of manual to ensure the accuracy of its contents EST assumes responsibility for errors or omissions warning equipment can generate and radiate radio frequency energy this equipment is not installed in accordance with this manual may cause interference to radio communications This has been tested and found to comply within the limits Class A computing devices pursuant to Subpart B of Part 15 the FCC Rules These rules are designed to provide protection against such interference when this is operated in a commercial environment Operation this equipment is likely to cause interference in which case user at his own expense will be required to take whatever may be required to correct the interference information The dialer complies with Part 68 of the FCC rules The FCC registration number and the Ringer Equivalence REN are on the back of the dialer This must be provided to the telephone company if An FCC compliant telephone cord and modular plug cord is with the dialer The dialer is designed to be to the telephone network using the supplied cord an RJ31X or RJ38X jack which must also comply with Part 68 rules The REN is used to determine the quantity of devices which be connected to the telephone line Excessive RENs on telephone line may result in the devices not ringing in Smoke Management Application Manual Manuals Online to an incoming call In most but not all areas the of RENs should not exceed five 5 To be certain the of devices that may be connected to a line as by the total RENs contact the local telephone the dialer causes harm to the telephone network the company will notify you in advance that discontinuance of service may be required If notice isn practical the telephone company will you as soon as possible You will also be advised of right to file a complaint with the FCC if you believe it necessary The telephone company may make changes in it facilities operations or procedures that could affect the of the dialer If this happens the telephone will provide advance notice in order for you to necessary modifications to maintain uninterrupted trouble is experienced with the dialer for repair or information contact Edwards Systems Technology Parkland Drive Sarasota Florida USA 34243 1 800 655 4497 If the dialer is causing harm to telephone network the telephone company may request disconnect the dialer until the problem is resolved No repairs may be performed on the dialer by the user The dialer cannot be used on public coin phone or party line provided by the telephone company DOC information The Canadian Department of Communications label certified equipment This certification means that the meets certain telecommunications network protective and safety requirements The Department does not the equipment will operate to the user satisfaction installing this equipment users should ensure that it is to be connected to the facilities of the local company The equipment must also be using an acceptable method of connection The should be aware that compliance with the above may not prevent degradation of service in some to certified equipment should be made by an authorized maintenance facility designated by the supplier Any or alterations made by the user to this equipment or malfunctions may give the telecommunications cause to request the user disconnect the equipment Smoke Management Application Manual Manuals Online should ensure for their own protection that the electrical connections of the power utility telephone lines and metallic water pipe system if present are connected This precaution may be particularly important in rural Users should not attempt to make such connections but should contact the appropriate electric inspection or electrician as appropriate The Load Number LN assigned to each terminal device the percentage of the total load to be connected to a loop which is used by the device to prevent The termination on a loop may consist of any of devices subject only to the requirements that the of the Load Numbers of all the devices does not exceed 100 Smoke Management Application Manual Manuals Online 1 fire geometry and smoke movement Chapter introduces you to the basics of smoke development control Theory of smoke management and building for smoke control are covered along with necessary for the installation of an effective Smoke Control System to the fire problem 1.2 management 1.3 of combustion 1.4 1.4 1.5 movement 1.5 of smoke control 1.14 considerations 1.14 of systems 1.18 systems 1.19