Kidde Edwards Data Sheet K85001-0421 - Electromagnetic Door Holders

Electromagnetic Holders Door Holders are ruggedly constructed and designed The housing is finished with an aluminum durable baked polyester powder paint The floor or wall sec houses the electromagnet while the contact plate attaches to door The contact plate has a shock absorbing nylon swivel which allows the plate to adjust to any door angle Floor units available in single door or double door back to back versions units are available in flush or surface mounted versions releases should be installed wherever doors may be effec used to confine smoke and fire or where the release of a self door from a remote location is desirable for other reasons operation is an inherent feature of Kidde door holder re If power fails doors are released automatically but may be or closed manually at any time All units are free of moving are self contained and require no maintenance door holder releases have a holding force of approximately to 25 Lbf 66 to 111N The device holds a door open while en When de energized by a relay controlled by the fire alarm or other switch the door is released to a closed position the spread of smoke and flames Electromagnetic door should be used and installed in accordance with local Codes and Standards Features Floor and wall mounted styles Low power consumption AC DC models Completely silent operation 25 Lbf 111N nominal holding force Adjustable swivel contact plate Models Mounted electromagnet portion consists of a floor plate and a floor which when installed with gaskets provided form a electrical junction box Incoming conduit connects into floor plate mounted units are available with one Cat No 1501 or two No 1502 magnet faces for holding a single door or two back to back Mounted mounted models are available in flush semi flush and surface configurations Flush and semi flush models are de for concealed wiring applications and mount on standard gang 2 x 4 inch outlet boxes Surface mounted models on a surface adaptor housing junction box which is 1 of 4 D A T A S H E E T K85001 0421 to be used for installation purposes Issue 1 Catalog u Power Supplies and AccessoriesTechnology that saves livesfirealarmresources com Flush Wall Mounted Long Catch Plate Flush Wall Mounted Short Catch Plate Floor Mounted Single Door Surface Wall Mounted max 6.37 min mm max 161.8 mm min Floor Mounted Double Door Completely Flush Wall Mounted max 8.37 min mm max 212.6 mm min Plate Extensions the extension rods are included The end pieces are included the doorholders or can be ordered separately max 6.37 min mm max 161.8 mm min mm mm mm mm max 8.37 min mm max 212.6 mm min mm mm mm mm mm mm mm mm mm mm mm mm 2 of 4 D A T A S H E E T K85001 0421 to be used for installation purposes Issue 1 Vac 60 Hz Vdc 120 Vac 60 Hz No is a double unit which draws 015 per side Mounted Single Door Mounted Double Door Wall Mounted Long Catch Plate Wall Mounted Short Catch Plate Wall Mounted Flush Wall Mounted Information No Mounted Single Door Mounted Double Door Wall Mounted Long Catch Plate Wall Mounted Short Catch Plate Wall Mounted Flush Wall Mounted plate extension assembly 1.5 plate extension assembly 2.5 plate extension assembly 5.25 to 7.5 inches plate extension assembly 7.5 to 12 inches armature short for use with 1501 1502 1505 1508 and 1509 door holders armature long for use with 1504 door holder These Door Holder units will not operate without electrical power Wt kg 2.45 2.27 0.91 0.91 1.36 0.91 0.11 0.11 0.23 0.45 0.11 0.11 3 of 4 D A T A S H E E T K85001 0421 to be used for installation purposes Issue 1 that saves lives us kidde fire fs utc com Kidde com EngineeredSystems is a UTC brand Corporate Park Drive NC 27302 2016 United Technologies Corporation rights reserved 4 of 4 D A T A S H E E T K85001 0421 to be used for installation purposes Issue 1