Faraday MPC-6000 MPC-7000 OPERATION INSTRUCTIONS

MPC 6000 MPC 7000 OPERATING INSTRUCTIONS case of alarm the System Alarm LED flashes LCD will display alarm conditions and the panel buzzer Local audible and visual signals and remote alarm signals operate Operation an alarm occurs proceed according to the established emergency plan Assure that all personnel accounted for and notify the Fire Department to advise of the alarm and or verify that an automatic has been received at the Fire Department silence the alarm Personnel Only silence the notification appliances after evacuation where permitted press the Alarm Silence The notification appliances and panel buzzer will be silenced and LED indications will from flashing to continuous The Alarm Silenced LED will be lit Do not reset the panel until the alarm has been cleared Alarm silence inhibit if set prevents the alarm from being silenced for a time reset panel after alarm the alarm condition is corrected return the panel to normal standby operation by pressing System Reset switch Operation is indicated by Trouble LED flashes will display trouble conditions buzzer sounds silence the trouble buzzer the Acknowledge switch The Trouble Silenced LED lights and the specific trouble LED s change to continuous display When the trouble condition has been cleared you may need reset the panel to restore to a normal standby condition Leaving the panel in a trouble condition may cause a fire alarm condition not to a fire alarm sequence green AC Power On LED will be lit and no other indicators on Standby Condition service contact Number these instructions and mount them near the control unit for operator reference Fernwood Drive Park New Jersey 07932 315 447311 2