Faraday VPS-100 Voice Plus

Model VPS 100 Voice Plus Voice Evacuation System Clean Dead front Construction Digitally Recorded Automatic Evacuation Message to 4 Minutes of Message Capacity 100 Watt Bullet Proof Amplifier 25 or 70 VRMS Field Selectable 120 VAC Power Supply and Battery Charger Live Microphone Override of Message and Tone Analog Addressable Compatible High Reliability No Maintenance Fully Supervised Easy Installation and Operation Natural Sound Recordings Built in Alarm and Alert Signals Up to 4 Minute Message Capacity Works with 12VDC or 24VDC Fire Alarm Panels Works with Analog Addressable and Microprocessor Fire Alarm Panels Three Minute Message Restart on Microphone Key 24 Hour Backup with two 12V 7AHr Batteries Made in the USA NYMEA CSFM listed VPS 100 operates with any Faraday Fire Panel FACP and provides 100 Watts of power VPS 100 includes all necessary features to an effective voice evacuation system the addition of zone splitters remote micro panels and expander modules the VPS 100 be custom configured to satisfy the needs of applications VPS 100 has its own power supply and battery Panel must be wired with 120 VAC and batteries connected digital message repeater DMR is built into The selection of alarm tone and automatic repeats as well as the 6 Hour delay of AC power failure reporting feature are all configurable paging microphone is an integral component of the microphone from the panel will a condition which will be reported as well as through the FACP VPS 100 is housed in an attractive surface or mounted backbox with a hinged and locked door With Keylocked Door Removed Specifications voice evacuation system shall be Faraday VPS or approved equal voice evacuation system shall provide 100 signal power and 100 watts voice power and be UL listed voice evacuation system shall be microprocessor and shall contain an integral microphone 100 audio amplifier tone generator digital message 120VAC power supply and battery charger voice evacuation message signal shall be until the Fire Alarm Control Panel FACP reset or until fire emergency personnel interrupt broadcast with a manual page On reset system automatically return to standby normal condition secondary message shall be provided which can triggered by the closure of a contact from either FACP or from any normally open contact device paging microphone s will be supported the system through a supervised circuit Remote may be mounted up to 5,000 feet from the voice evacuation panel Watts 25 70 VRMS Tone and Voice Dimensions W x 18 H x 4 D Power 0.8A VDC Battery Power Standby 1.00A Alarm Information Wiring Building Technologies Inc Fernwood Road Florham Park NJ 07932 973 593 2600 Fax 973 593 6670 www faradayfirealarms com The information contained in this document is intended only as a summary and subject to change without notice The devices described in this document have specific sheets which cover various technical limitation and liability information Copies these instruction sheets and the General Product Warning and Limitations Document also contains important information are provided with the product and are available the Manufacturer Information contained in these documents should be consulted specifying or using the product For further information or assistance concerning problems contact the Manufacturer 2M SBT IG 2006 Supersedes sheet dated 12 03