Farenhyt IDP-Pull-DA Addressable Dual Action Pull Station

Addressable Single Action and Dual Action Stations IDP Pull DA IDP Pull SA is a single action pull station requiring only one to activate the station The IDP Pull DA is a dual action station requiring two motions to active the station Both pull are designed to work with Silent Knight IFP series fire control panels FACPs Installer can open station without causing an alarm condition Dual color LED is visible through handle of station blinks green indicate normal operation and remains steady red in an alarm Key operated test and reset lock using lock plate actuator Key matches compatible FACP locks Meets the Americans with Disabilities Act Accessibility ADAAG controls and operating mechanisms Section 4.1.3 13 Meets ADA requirement for 5 lbs maximum pull force to active Shell door and handle molded from durable LEXAN Reliable analog communications for trouble free operation Braille text on station handle Handle latches in down position and the word Activated clearly indicating the station has been pulled Rotary address switches for fast installation UL Listed including UL 38 Standard of Manually Actuated System IDP Pull SA and IDP Pull DA can be surface mounted to an surface back box or semi flush mounted on a standard with a minimum depth of 2.13 cm or double or 4 10.61 cm square electrical box You can also use the System Sensor PN BG TR trim ring if the station is semi flush mounted Listings Vol IX IDP Pull DA IDP Pull SA and IDP Pull DA are with the following FACPs IFP 2000 RPS 2000 Intelligent Fire IFP 1000 ECS Intelligent Fire Panel IFP 100 ECS Intelligent Fire Panel IFP 50 Intelligent Fire 350286 Rev F 2013 Honeywell International Inc Information Action Pull Station Action Pull Station trim ring backbox indoor outdoor Unless otherwise noted specifications apply to IDP Pull SA and 5.5 14 cm 4 10.2 cm 5.4 oz 3.7 cm Material LEXAN polycarbonate resin LED Green Normal Red Alarm Single pole single throw SPST normally open N O which closes upon activation of the pull station Voltage 15 VDC Current LED flashing 300 Gauge Up to 12 AWG 3.1 mm2 Temperature 32 120 0 49 10 93 non condensing document is not intended to be used for installation purposes We try to keep our information up to date and accurate We cannot cover all specific applications anticipate all requirements All specifications are subject to change without notice more information contact Silent Knight 12 Clintonville Road Northford CT 06472 Phone 800 328 0103 Fax 203 484 7118 For Technical Support Please call www farenhyt com in the U S A