Farenhyt IFP-100ECS Emergency Communication System with Fire Alarm Control Panel

Emergency Communication System with Alarm Control Panel IFP 100ECS is an intelligent analog addressable fire alarm panel combined with an Emergency Communication ECS When the ECS features are enabled they are with the fire alarm and voice evacuation functions of control panel The IFP 100ECS panel and accessories features to meet the requirements for Mass Notification as described in UL 2572 IFP 100ECS has four notification appliance circuits that be programmed for notification outputs or auxiliary power FACP also has a built in dual line digital fire Form C trouble relay and two programmable C relays The firmware has powerful features such as sensitivity day night thresholds drift compensation maintenance alert and calibration trouble alert IFP 100ECS supports a variety of devices including or RA 1000 remote annunciators 5824 serial parallel interface module for printing system reports 5496 or intelligent power modules and IDP or SD devices IFP 100ECS system is scalable from 50 to 1000 watts a distributed amplification scheme to provide the power to appropriate areas for evacuation coverage 15 Recordable one minute messages that can be mapped to ECS buttons Can select ECS message as priority over fire Support of up to seven ECS RCU The ECS RCU meets the for a LOC Programmable trigger inputs from an external source such as Monaco system to either the VCM RVM or 5880 Up to inputs available on the 5880 module Built in support for up to 99 IDP detectors and 99 IDP or 127 SD devices All the features of the IFP 100 Fire Alarm Control Panel with an emergency communication system Support for up to eight ECS 50W ECS 125W or ECS SBUS addressable amplifiers for a maximum of watts per system Single enclosure for both fire and emergency control system On board supervised microphone Up to 64 mappable speaker circuits using a combination of 125W and ECS CE4 mappable to 40 buttons selected output groups Supports 25 Vrms or 70.7 Vrms speaker circuits using UL listed for 520Hz signaling with ECS DUAL50W and speakers Communication System Listings of York Built in RS 232 and USB interface for All call and Non Active Call buttons to select all active or all the non active groups IFP 100ECS can be surface or flush IFP 100ECS is compatible with the voice evacuation components ECS 50W or VIP 50 50 watt amplifier ECS 125W or VIP 125 125 watt amplifier ECS DUAL50W 50 100 watt amplifier ECS RVM remote voice microphone ECS SW24 24 switch expander ECS VCM voice control module included 350770 Rev G 2014 Honeywell International Inc Dimensions 20 x 26 x 4 13 16 Red Temperature 32 120 0 49 10 93 non condensing AC 120 VAC 60 Hz 2.5A or VAC 50 Hz 1.5A max Current 170 mA Current 365 mA Charging Capacity 7 35 AH Size 18 AH max allowed in cabinet Use RBB cabinet for larger batteries up to 35 AH per Integration Wiring Six conductor voice bus SBUS Devices the data sheets listed below for a complete listing of IDP or SD devices IDP Device Protocol data sheet SD Device Protocol data sheet 13 NFPA 15 NFPA 16 NFPA 70 72 Central Station Remote Signalling Local Signalling Systems Auxiliary Protected Unit Water Deluge Releasing Service listing CSFM COA OSHPD CA OSP 0065 10 Information with Emergency Control Accessories or VIP 50 Watt Amplifier or VIP 125 125 Watt Amplifier Watt Amplifier voice Circuit Audio Expander Switch Expander Control Module Compliance Kit document is not intended to be used for installation purposes We try to keep our information up to date and accurate We cannot cover all specific applications or all requirements All specifications are subject to change without notice For more contact Silent Knight 12 Clintonville Road Northford CT 06472 1610 Phone 328 0103 Fax 203 484 7118 For Technical Support Please call 800 446 6444 in