Farenhyt IFP-RPT Repeater Module for IFP-2000 RPS-2000 Data Sheet

Network Repeater IFP RPT FO IFP 2000 network repeater modules are used when to be networked are located further than 20 feet or when panels are located in multiple buildings IFP RPT is available for use in two versions IFP RPT FO IFP RPT UTP IFP RPT UTP repeater is used to network panels using pair copper wiring IFP RPT FO repeater is used to network panels using multimode 62.5 125 micron fiber optic cable or pair copper wiring IFP RPT UTP and IFP RPT FO can mount directly the control panel cabinet or the repeaters can be using an accessory kit The kits include a small with door key mounting hardware five foot ribbon to connect the repeater to the control panel and the printed circuit board For specific installation refer to the IFP 2000 installation manual part 151430 accessory kit part numbers are Wired twisted pair network repeater and cabinet kit Fiber optic network repeater card and kit Voltage Current Temperature 32 to 120 F 0 to 49 C Humidity VDC provided from IFP 2000 amp to 93 RH non condensing Listings Repeater of Repeater Listed under UL 864 9th Edition Supports BUS or class A style 7 wiring Information twisted pair network card Fiber optic network repeater Wired twisted pair network card and cabinet Fiber optic network card and cabinet Part pin IDC ribbon cable L document is not intended to be used for installation purposes We try to our product information up to date and accurate We cannot cover all applications or anticipate all requirements All specifications are subject change without notice For more information contact Silent Knight 12 Road Northford CT 06472 1610 Phone 800 328 0103 Fax 484 7118 www farenhyt com 350403 Rev C 2011 Honeywell International Inc