Farenhyt RA-100 Remote LCD Annunciator

Remote Annunciator RA 100 Remote Annunciator can be used to operate and the Farenhyt Fire Control Panels The RA 100 and display match the built in annunciator of the IFP control panel The remote annunciator connects to the panel via the RS 485 system bus When the system is normal operation and has AC power the Power LED is lit all other LEDs are off The other LEDs turn on as alarms troubles system silenced and AC power losses 80 character backlit LCD display 4 lines with 20 characters Tactile audible feedback Larger keypad buttons for system Reset and Silence RS 485 interface to panel Can be flush or surface mounted Trim ring available for mounting Operation and appearance is identical to IFP 100 built in and end fire drills with a single key press View event history by alarms supervisories or troubles Supports simultaneous use by multiple users from up to 12 on board piezo sounder audibly indicates alarms troubles RA 100s supervisories Five Status LEDs for alarms supervisory trouble silence AC power indications UL listed complies with NFPA 72 CSFM listed MEA listed Wiring lengths up to 6000 ft from the control panel Listings IX RA 100 can be surface or flush Use the optional trim ring for mounts When flush mounting an box is optional If using an box use a 4S single gang or box RA 100 is compatible with the following IFP 1000ECS Emergency Communication with Fire Alarm Control Panel IFP 100ECS Emergency Communication and Fire Alarm Control Panel ECS RCU Remote Command Unit IFP 1000 Intelligent Fire Panel IFP 100 Intelligent Fire Panel IFP 50 Intelligent Fire 350389 Rev F 2014 Honeywell International Inc Features Information Annunciator Four line LCD with 20 characters per line red cabinet Accessories Mount Trim Ring Voltage 24 VDC Current 20 mA Current 25 mA Per IFP 1000 IFP 1000ECS IFP 100 System 12 per IFP 50 System 8 Distance Up to 6,000 feet from control panel on wiring method Temperature 32 F to 120 F 0 C to 49 C 10 93 non condensing Mount wall 12.25 x 11.5 x 7 8 x 29.2H x 2.2D cm wall 9 3 8 x 8 3 8 x 2 x 21.3H x 5.1D cm Mount Including Trim Ring 12.25 x 11.5 3 31.1W x 29.2H x 2.2D cm document is not intended to be used for installation purposes We try to keep our information up to date and accurate We cannot cover all specific applications or all requirements All specifications are subject to change without notice For information contact Silent Knight 12 Clintonville Road Northford CT 06472 1610 800 328 0103 Fax 203 484 7118 For Technical Support Please call www farenhyt com in the