Farenhyt Selectable-Output Low Frequency Sounder and Low Frequency Sounder Strobes

Agency Listings Low Frequency and Low Frequency Sounder Sensor SpectrAlert Advance low frequency and low frequency sounder strobes offers the most and easy to use line of low frequency sounder and frequency sounder strobes in the industry With white red plastic housings dual listed for wall and ceiling SpectrAlert Advance can meet virtually any requirement Advance wall mount low frequency sounder low frequency sounder strobes include a variety of that increase their application versatility while installation All devices feature plug in designs minimal intrusion into the back box making fast and foolproof while virtually eliminating and time consuming ground faults further simplify installation and protect devices from damage SpectrAlert Advance utilizes a mounting plate with an onboard shorting spring installers can test wiring continuity before the device is can also easily adapt devices to a suit a wide of application requirements using field selectable settings automatic selection of 12 or 24 volt and a rotary switch for low frequency sounder Plug in design with minimal intrusion into the back box Tamper resistant construction Field selectable candela settings on wall units 135 150 and 185 Low Frequency Sounder rated at 76 dBA at 16 volts Rotary switch for low frequency sounder tone Universal mounting plate for wall units Mounting plate shorting spring checks wiring continuity device installation Electrically compatible with legacy SpectrAlert devices Compatible with MDL3 sync module Listed for ceiling or wall mounting Meets NFPA 72 chapter 18 29 requirements for low sounders Mount Dimension 6.4 L x 4.7 W x 2.5 D mm L x 119 mm W x 64 mm D Frequency Sounder Sounder Strobes Dimensions 5.6 L 4.7 W 1.3 D mm L 119 mm W 33 mm D Frequency Sounder Strobe with Surface Mount Box Dimensions SBBR SBBW 6.4 L x 4.7 x 4.3 D 162 mm L x 120 mm W x 108 mm D Frequency Sounder with Surface Mount Back Dimensions SBBR SBBW 5.7 L x 4.8 W x D 145 mm L x 120 mm W x 76 mm D Flash Rate 1 flash per second Voltage Low Frequency Sounder Strobe 12 DC FWR or regulated 24 DC FWR1 Voltage Range Low Frequency Sounder 12VDC FWR1 Voltage Range 8 to 17.5 V 12 V or 16 to 33 V 24 V nominal Voltage Range MDL3 Sync Module 8.5 to V 12 V nominal or 16.5 to 33 V 24 V Terminal Wire Gauge 12 to 18 AWG 1 Full Wave Rectified FWR voltage is a non time varying power source that is used on power supply and panel outputs 350809 Rev A 2013 Honeywell International Inc Current Draw Data Max Strobe Current Draw mA RMS DC Volts Volts Max Low Frequency Current Draw mA RMS Pattern Volts Volts Max Current Draw mA RMS 2 Wire Low Frequency Sounder High Candela Range 135 185 cd Volts Volts Input 150 177 185 FWR Input 135 150 177 185 292 325 344 Temporal 309 343 351 337 362 387 417 Continuous 393 395 432 433 Frequency Sounder Tones and Sound Output Data Frequency Sounder and Low Frequency Sounder Strobe Output dBA Nominal Anechoic DC PositionSound Pattern DC ratings provided are for continuous voltage as provided by the NAC DC DC cont Temperature Range to 120 0 to 49 Humidity Range to 93 relative humidity non condensing Information Low Frequency Sounder Strobes Low Frequency Sounder Strobe cd Red Low Frequency Sounder High cd White Frequency Sounders Frequency Sounder Red Frequency Sounder White Box Skirt Wall Red Box Skirt Wall White Mount Back Box Wall Red Mount Back Box Wall White Ring Wall Red Ring Wall White document is not intended to be used for installation purposes We try to keep our information up to date and accurate We cannot cover all specific applications or all requirements All specifications are subject to change without notice For information contact Silent Knight 12 Clintonville Road Northford CT 06472 1610 800 328 0103 Fax 203 484 7118 www farenhyt com in the U S A