Farenhyt The SpectrAlert® Advance Field Selectable Mass Notification Devices

The SpectrAlert Advance Selectable Notification Devices Advance mass notification devices and accessories application versatility with all the time and money saving of the SpectrAlert Advance line Advance the broadest and most versatile line of devices available includes a wide range of devices to meet notification application requirements on white housings SW ALERT SWH ALERT and amber lens strobes and speaker strobes provide visual for mass notification in compliance with ANSI UL 1638 for General Signaling Visible Appliances Other ALERT models provide clear lenses for use with color lens strobe amber blue green and red that easily attach to strobe speaker strobe devices without a candela derating addition SpectrAlert Advance mass notification devices include plain strobes horn strobes and speaker strobes These along with ALERT printed devices and SpectrAlert Advance can meet a wide range of requirements for indoor and applications including mass notification general signaling weather and emergency response SpectrAlert Advance mass notification and general signaling are compatible with the entire SpectrAlert Advance and include the same time and money saving innovations For example plug in simplify installation and reduce costly ground faults universal plates with onboard shorting springs test wiring continuity to installation and protect devices from damage and field settings provide versatility and enable installers to quickly each device to meet application requirements Notification Features Plain or ALERT printed white housings Amber lens strobes and speaker strobes Color lens attachments for use with clear lens wall or ceiling strobes Meets DOD specification requirements Advance Features Plug in design for simplified installation and troubleshooting Mounting plate shorting spring easily tests wiring continuity Automatic selection of 12 or 24 volt operation at 15 and 15 75 Field selectable candela settings of 15 15 75 30 75 95 110 115 150 177 185 Rated from 32 to 120 indoor devices to 151 4X IP56 weatherproof devices Optional tamper resistant Torx head screw Compatible with System Sensor synchronization protocol Devices Listings Advance Specifications ENGINEERING Advance strobes and horn strobes mount to a standard 4 x 4 x 1.5 back box octagon back box or double gang back box products shall also mount to a single 2 x 4 x 1 7 8 5.08 x 10.16 x 4.76 cm box SpectrAlert Advance speaker strobes mount to a 4 x 4 x 2 1 8 inch 10.16 x 10.16 5.40 cm back box A universal mounting plate be used for mounting ceiling and wall The notification appliance circuit wiring amplifier wiring shall terminate at the universal plate Also SpectrAlert Advance when used with the Sync accessory shall be powered from a non notification appliance circuit output and shall on a nominal 12 or 24 volts When used the Sync Module 12 volt rated appliance circuit outputs shall operate 9 and 17.5 volts 24 volt rated notification circuit outputs shall operate between 17 33 volts Indoor SpectrAlert Advance products operate between 32 and 120 0 and from a regulated DC or full wave rectified power supply Strobes horn strobes and strobes shall have field selectable candela including 15 15 75 30 75,95 110 115 150 177 and 185 351514 Rev A 2010 Honeywell International Inc strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 clear lens strobes and shall be for fire protective service or shall be approved for fire protective service as listed in ANSI UL 1638 amber lens strobes strobe shall be wired as a primary signaling notification appliance and comply with the Americans with Disabilities Act for visible signaling appliances flashing at 1 Hz over the strobe entire operating voltage range The strobe light consist of a xenon flash tube and associated lens reflector system STROBE COMBINATION horn strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be for fire protective service The horn strobe shall be wired as a primary signaling notification appliance and comply with Americans with Disabilities Act requirements for visible signaling appliances flashing at 1 Hz over the strobe entire operating range The strobe light shall consist of a xenon flash tube and associated lens reflector system The horn shall have three options and an option to switch between a temporal three pattern and a non temporal continuous pattern These shall be set by a multiple position switch The horn and horn strobe models shall operate on a coded or non coded power STROBE COMBINATION speaker strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1480 and UL 1971 and be for fire protective signaling systems Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via switch and shall have a frequency range of 400 to 4000 Hz Speaker shall have power taps that are selected by rotary The strobe shall comply with the NFPA 72 requirements for visible signaling appliances flashing at 1 Hz over the strobe operating voltage range The strobe light shall consist of a xenon flash tube and associated lens reflector system PRODUCTS Advance outdoor strobes horn strobes and speaker strobes shall be listed for outdoor use by UL and shall operate and 151 and 66 The products shall be listed for use with a System Sensor outdoor weatherproof box with and conduit entries MODULE module shall be a System Sensor Sync model MDL3R or MDL3W listed to UL 464 and shall be approved for fire service The module shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three Also while operating strobes the module shall silence the horns on horn strobe models over a single pair of wires The module shall mount to a 4 x 4 11 16 x 2 1 8 inch 11.90 x 11.90 x 5.40 cm back box The module shall also control two Style Y class B circuits or Style Z class A circuit The module shall synchronize multiple zones Daisy chaining Two or more synchronization modules will synchronize all the zones they control The module shall not operate on a coded power supply LENS STROBE ATTACHMENT System Sensor SpectrAlert Advance color lens attachments shall be approved for fire protective service as listed in UL 1638 lens attachments shall only be used with plain non fire printed System Sensor strobe devices They shall mount to any wall ceiling strobe and be rated from to 151 37 to 66 Operating Temperature Series Operating Temperature Range Strobe and Horn Strobe including lens 5.6 L x 4.7 W x 2.5 D L x 5.0 W x 4.7 D Speaker Strobe including lens and speaker Strobe including lens diameter x 2.5 D Voltage strobes and horn strobes Voltage speakers Supervisory Voltage speakers Voltage Range Flash Rate Frequency Range Power SOUND OUTPUT Reverberant dBA 10 ft SPS Series SPV Series SPC Series SPCV Series 12 DC FWR or regulated 24 DC FWR V or 70.7 V nominal VDC to 17.5 V 12 V nominal or 17 to 33 V 24 V nominal flash per second to 4000 Hz 1 2 watts to 120 0 to 49 to 151 40 to 66 to 93 non condensing indoor models 1W Current Draw Data Max Strobe Current Draw mA RMS Volts Volts Derating Outdoor Devices Output cd rating