Fike Conventional Smoke Detector Bases D1176

OUTPUT MODULE MODULE MODULE MODULE MODULE SMOKE BASES and Engineering Specification 67 1034 67 1035 67 1036 67 1037 AND 6 SERIES SMOKE DETECTOR BASE Listed S4021 Approval in process 4 and 6 Series Smoke Detector Bases are designed for use with the 67 1033 Ionization Smoke 63 1024 Photoelectric Smoke Detector 63 1025 with Heat Smoke Detector and the 60 1029 60 1030 Fixed Temperature Rate of Rise Heat Detector 6 base is an electronics free base featuring a plastic lug Each base is equipped with a resistor Refer the chart below for additional specifications The 4 base a 4 version of the 6 base 63 1012 is designed specifically for use with the 67 Ionization Smoke Detector 63 1024 Photoelectric Detector 63 1025 Photoelectric with Heat Smoke or the 60 1029 or 60 1030 Fixed Temperature Heat Detector The 63 1012 is a 6 base with sets of Form C relay contacts DPDT 1 amp at 30 and 0.5 amp at 125 VAC when this type of function is It is Underwriters Laboratories approved for device service 63 1012 is also approved for use with Fike Models 67 1016 63 1007 63 1016 60 1020 60 1022 1999 Issue WIRE AUXILLIARY RELAY BASES Current 43mA 58mA 30.0V Max S 10th St P O Box 610 Blue Springs MO 64013 0610 U S A 816 229 3405 Fax 816 229 4615 E mail fpssales fike com Base Series Base Series of Line Device 1 2W Listed shown is example only Not annunciators have line resistance device must be current limited to 20 mA 24 VDC Not current limiting current could result in damage to detector or cause a no alarm condition Wiring Terminals for the NS4 and NS6 are identical Wiring Terminals for the 4 and 6 are identical RELAY OPERATION Series Listed Base Relays shown with power off of Line Device 1 2W NO D1176 Copyright 1999 by Fike Corporation All rights reserved PRINTED IN U S A