Fike Explosion Proof Thermal Detectors E 1 15 01

Architect and Engineer Specification Suppression Systems Thermotec explosion proof thermal detectors are to detect the presence of heat beyond the detector set point for the purpose of activating a fire and or automatic suppression system The detectors explosion rated for Class I and Class II hazardous envi The maximum area coverage for each detector rated at 50 ft x 50 ft in accordance with the manufacturer limitations thermal detectors are normally open devices especially for fire detection and alarm systems detectors are a rate anticipation type that operate im whenever the ambient area temperature reaches preset temperature setting of the detector regardless how fast or slow the temperature rises When the tem drops back down below the set point the detector reset itself rapid heat increase situations the rate anticipation allows the detector to respond one to three degrees of the set point However the detector does not re to momentary fluctuations of temperatures below that the alarm setting thus eliminating false alarms Rating 135o F Ex Proof Thermal 194o F Ex Proof Thermal E19310 Mutual No 7270 021 001 VAC VDC VDC amps amp amp Coverage 50 ft x 50 ft max Proof Detectors Detect A Fire explosion proof thermal detectors are to detect the presence of heat beyond the detector for the purpose of activating a fire alarm and or suppression system The detectors are explo rated for Class I Groups B C and D and Class II E F and G hazardous environments The maxi spacings for each detector are as shown in Table 1 Detect A Fire thermal detectors are normally open de designed especially for fire detection and alarm sys The detectors come in a range of temperature set from 190oF to 450oF Each is color coded to visually its temperature setting Refer to Table 1 detectors are a rate compensation type that operate whenever the ambient area temperature the preset temperature setting of the detector re of how fast or slow the temperature rises When temperature drops back down below the set point the will reset itself However the detector does not re to momentary fluctuations of temperatures below that the alarm setting thus eliminating false alarms 2002 Issue S 10th Street P O Box 610 cid 127 Blue Springs Missouri 64013 0610 U S A cid 127 816 229 3405 cid 127 Fax 816 229 0314 cid 127 www fike com Rating 190oF Ex Proof Thermal 225oF Ex Proof Thermal 275oF Ex Proof Thermal 325oF Ex Proof Thermal 450oF Ex Proof Thermal E19310 Mutual VAC VDC amps amp detectors are rated explosion proof for installation in environments Therefore all installation prac must be in accordance with all applicable codes by hazardous rated enclosures conduit seals etc as 1 Fike Corporation All rights reserved No previously 1128 are subject change without notice