Autocall SmartSync Two-Wire Operation, Non-Addressable Mini-Horns

File Preview
File Preview
Click below to download for free

Text Preview

UL ULC Listed Appliances Two Wire Operation Non Addressable Mini Horns current 24 VDC electronic mini horn provides the following Operation with Autocall SmartSync two wire horn or strobe control Small profile horn packaged in a rugged high impact flame retardant housing available in red or white Snap on cover presents a clean and neat appearance Removal of the cover requires a tool Convenient mounting to a single gang electrical box flush or surface two wire control of audible and visible notification provides the following functions Control of mini horn tone as Temporal Pattern March Time pattern or continuously controlled separately from visible appliances on the circuit Visible appliances on the same SmartSync circuit operate at a Operation that allows On until silenced and On until reset on the 1 Hz flash rate two wire pair reference Listed to Standard 464 Listed to Standard S525 provide a loud and penetrating notification sound controlled SmartSync two wire operation The compact package allows in a variety of convenient locations An output level switch selection of low or high sound output as required for the location specifications for details operation mode uses a two wire circuit to activate the horn strobe on the same Notification Appliance Circuit NAC and then horn can be silenced while the strobe remains flashing The horn as On until silenced while the strobe operation is On until two wire control is available for the following models 4006 4007ES Hybrid 4008 4010 4010ES 4100ES and 4100U Fire Control Units FACUs Refer to individual product data sheets for information 4009 IDNet NAC Extenders Refer to the 4009 IDNet NAC Extender for with IDNet Communications or Conventional NACs AC4009 0002 sheet SmartSync Control Module SCM Model A4905 9938 Refer to the Control Module and Strobe Synchronization Modules data sheet 1 and side view of the red mini horn selection 1 Product selection mini horn mini horn 2 Specifications voltage range 16 VDC to 33 VDC mA maximum rating 1 2 in H x 2 3 4 in W x 1 1 4 in D or 114 mm x mm x 32 mm to 122 or 0 to 50 to 93 non condensing at 100 or 38 blocks for 18 AWG to 12 AWG or 0.82 to 3.31 mm two wires per terminal for in or wiring 3 Sound output ratings range range Level Test chamber test per UL 464 10 ft or 3 m chamber test each ULC S525 at 3 m or 10 ft dispersion reference for each ULC Level Selection dBA dBA dBA dBA dBA at 40 off axis dBA at 85 off axis UL output ratings below 75 dBA are for NFPA 72 Private Mode ULC output ratings below 85 dBA are for use in applications each applicable local codes Additional listings may be applicable contact your local Autocall product supplier for the latest status Rev 3 2 2020 reference additional information refer to A4901 TrueAlert Non Addressable Mini Horn Installation Instructions 579 870AC Two Wire Operation Non Addressable Mini Horns 2 reference 2020 Johnson Controls All rights reserved All specifications and other information shown were current as of document revision and are subject to change without notice listings may be applicable contact your local Autocall product supplier for the latest status Listings and approvals under Tyco Fire Security GmbH and the names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm Code are registered of the National Fire Protection Association NFPA Rev 3 2 2020

Related Files