DSC AMB-500 – Installation Manual – English – Addressable Bravo 5 Ceiling-Mount Passive Infrared Detector

AMB-500 PIR Detector INSTRUCTIONS AMB-500 is a ceiling mount detector designed to provide reliable motion for residential and commercial applications. The AMB-500 uses a special lens made for 360 detection in conjunction with a quad element PIR sensor for uniform detection all around its field of view. Special attention is given to alarm immunity against RF, static, electrical transient to ensure trouble free for many years. AMB-500 uses a 2-wire connection for power and to communicate with the control This simplifies wiring and reduces installation cost. The AMB-500 low current also maximizes the number of devices that can be attached to an addressable loop. ** * Protected by one or more of the following patents: Canada 2099971, US 5444432 Rating ……………………………………………………… .75 mA (standby); 3 mA (test mode) Environment ……………….. 0 (32 5%-95% RH, non-condensing RF immunity …………………….. 10 V/m with 80% AM over range, 80MHz to 1.0GHz RF immunity …………………….. 10V with 80% AM over range 150kHz to 100MHz immunity ………………………………………………………………………………………………….. 15 kV immunity ………………………………………………………………………… 2.4 kV @ 1.2 joules detection range (diameter) placed 8 ft./ 2.4 m from floor: ………………………………………………………. 24 ft./ 7.3 m placed 10 ft./ 3.0 m from floor: …………………………………………………….. 30 ft./ 9.2 m placed 12 ft./ 3.6 m from floor: …………………………………………………… 40 ft./ 12.2 m detection speed ………………………………………………………………….. 0.5-10’/s (0.15-3m/s) switch contact rating ………………………………………………………………… 0.1A @ 24VDC Panel Compatibility PC4010/4020 v3.x PC5010, PC5015 v2.x with interface module COMPLIANCE STATEMENT Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your to use this equipment. equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance the manufacturer instructions, may cause interference to radio and television reception. It has been type tested and to comply with the limits for Class B device in accordance with the specifications in Subpart of Part 15 of Rules, which are designed to provide reasonable protection against such interference in any residential installation. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause to television or radio reception, which can be determined by turning the equipment off and on, the user is to try to correct the interference by one or more of the following measures: Re-orient the receiving antenna Relocate the alarm control with respect to the receiver Move the alarm control away from the receiver Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits. necessary, the user should consult the dealer or an experienced radio/television technician for additional The user may find the following booklet prepared by the FCC helpful: to Identify and Radio/Television Interference Problems This booklet is available from the U.S. Government Printing Washington, D.C. 20402, Stock # 004-000-00345-4. Warranty Security Controls Ltd. warrants that for a period of five years from the date of purchase, the product shall be of defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty, Security Controls Ltd. shall, at its option, repair or replace the defective equipment upon return of the to its repair depot. This warranty applies only to defects in parts and workmanship and not to damage in shipping or handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such lightning, excessive voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or application of the equipment. foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties,