DSC Connect Alarm Panel Programming PowerSeries Pro

If you can read this Click the icon to choose a or the slide. Reset: Right click on the slide and select slide or the button on the ribbon to the font choice box) you can read this Click the icon to choose a or the slide. Reset: Right click on the slide and select slide or the button on the ribbon to the font choice box) Alarm app programming guide for 02 Controls Alarm The alarm system need to be set up in order to connect to the server that the connection service for the Connect Alarm smartphone application. The alarm system can connect to the server over Ethernet (recommended) or but not both. Controls Alarm data consumption There are four sessions that can be used. In this document integration session is used though any session can be used. See of four sessions The Ethernet receiver can be defined as receiver 1 or 2 (in our document we receiver 1) and Cellular receiver can be defined as receiver 3 or 4 (in our we use receiver 3). See of four receivers It is recommended to perform factory reset before starting the configuration ( code>[999]). Be aware that this erases all previous Controls – Use ‘Insert >Header & Footer’ to modify this text and to all Alarm HEX and ASCII data To enter HEX data, perform the following: Step 1 Enter a section that allows for HEX data entries Step 2 Press [*] to enter HEX programming, the LED flash to indicate that HEX programming has been entered Step 3 Enter the required HEX data where switch from digits letters is done with ‘* button : = A = B = C = D = E = F Step 4 Press [*] to exit HEX programming, the LED return to solid Alphanumeric keyboard (for entering the APN or the domain of the server): to enter ‘.’, change to ASCII (press the button and switch to ASCII with the <> buttons) and enter and press the ‘*’ button. Controls Alarm Ethernet connection part 1 (chosen alternate communicator receiver 1. all other unused receivers (002-004) to line case of using groups set to 02 Alt Comm Auto (see slide 9 setting communication Account Code (needs to be different from FFFF) 1-8 (needs to be set according to used partitions) panel IP (0.0.0.0 DHCP enabled) . panel current IP can be seen in menu [851][992] mask (set automatically when DHCP is enabled) IP address (set automatically when DHCP is enabled) option (Supervision Type) option (Ethernet receiver enabled) DNS 1 (set automatically when DHCP is enabled) Panel DNS IP can be seen in menu [851][988] DNS 2 (set automatically when DHCP is enabled). Panel DNS IP can be seen in menu [851][989] Controls Alarm Ethernet connection part 2 option (Video Verification Enabled) hex char — Account code receiver account to be identical to integration identification number ([851][422]) with 2 digits less. for example the integration identification number is 1234567890ab, then the account will be 24567890ab. (hex) — 3061 Remote port URL of the cloud server: connect.tycomonitor.com (receiver 1 URL name) options