DSC POWER832 PC5010_P-832 USER MANUAL

About Your Security System DSC Power832 Security System has been designed to provide you with the greatest possible and convenience. Read this manual carefully and have your installer instruct you on your operation and on which features have been implemented in your system. All users of this should be equally instructed in its use. Fill out the Information page with all of you information and access codes and store this manual in a safe place for future reference. Detection equipment is capable of monitoring fire detection devices such as smoke detectors and providing warning if a fire condition is detected. Good fire detection depends on having adequate number of placed in appropriate locations. This equipment should be installed in accordance with 72 (N.F.P.A., Batterymarch Park, Quincey MA 02269). Carefully review the Family Escape guidelines in this manual. Your installer must enable the fire detection portion of this equipment before it becomes insure that your system continues to function as intended, you must test your system weekly. refer to Your System on page 13 of this manual. If your system does not function call your installing company for service. system is capable of transmitting alarms, troubles and emergency information over telephone to a monitoring station. If you inadvertently initiate an alarm, immediately call the monitoring to prevent an unnecessary response. The monitoring function must be enabled by the installer before it becomes functional. System Operation security system is made up of a DSC Power832 control panel, one or more Power832 keypads various sensors and detectors. The control panel will be mounted out of the way in a utility closet in a basement. The metal cabinet contains the system electronics, fuses and stand-by battery. is normally no reason for anyone but the installer or service professional to have access to the panel. the keypads have an audible indicator and command entry keys. The LED keypads have a group zone and system status lights. The LCD keypad has an alphanumeric liquid crystal display (LCD). keypad is used to send commands to the system and to display the current system status. The will be mounted in a convenient location inside the protected premises close to the entry/ door(s). security system has several zones of area protection and each of these zones will be connected one or more sensors (motion detectors, glassbreak detectors, door contacts, etc.). A sensor in will be indicated by the corresponding zone lights flashing on a LED keypad or by written on the LCD keypad. NOTICE security system cannot prevent emergencies. It is only intended to alert you and if included monitoring station of an emergency situation. Security systems are generally very reliable they may not work under all conditions and they are not a substitute for prudent security or life and property insurance. Your security system should be installed and serviced by security professionals who should instruct you on the level of protection that has been and on system operations. out the following information for future reference and store this manual in a safe place. Information Codes Master Code is: __________________________________________ Access Codes: __________________ 09 ____________________ __________________ 10 ____________________ __________________ 11 ____________________ __________________ 12 ____________________ __________________ 13 ____________________ __________________ 14 ____________________ __________________ 15 ____________________ __________________ 16 ____________________ ____________________ 25 ________________ ____________________ 26 ________________ ____________________ 27 ________________ ____________________ 28 ________________ ____________________ 29 ________________ ____________________ 30 ________________ ____________________ 31 ________________ ____________________ 32 ________________ Information are ________ active zones on the system. Area Type