DSC RFK5516 Installation Manual (French, Dutch, Italian, English)

Installation Instructions, Instructions d Installatiehandleiding, Istruzioni per l v1.2 Fran Nederlands, Italiano Please refer to the System Installation Manual for information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. These instructions shall be used in conjunction with the system Installation Manual of the Control Panel with which this equipment is intended to be used. Ce manuel contient des informations sur les restrictions concernant le fonctionnement et l du produit et des informations sur les restrictions en ce qui concerne la responsabilit du fabricant. La totalit du manuel doit lu Ce manuel doit utilis en conjonction avec le Manuel d du Panneau de contr Raadpleeg de installatiehandleiding van het systeem voor informatie over beperkingen m.b.t. productgebruik en functie en informatie over de beperkingen m.b.t. aansprakelijkheid van de fabrikant. Deze instructies dienen te worden gebruikt in combinatie met de installatiehandleiding van het systeem van de centrale waarmee deze apparatuur gebruikt wordt. Fare riferimento al manuale di installazione del sistema per avere informazioni sui limiti riguardanti l e il funzionamento del prodotto, nonch sui limiti di responsabilit del produttore. Le presenti istruzioni devono essere impiegate in combinazione con il manuale d del sistema della centrale di controllo con il quale si intende utilizzare l 9 0 0 7 7 9 9 R0 0 1 Instructions PK55XX keypads can be used on security systems with to 64 zones. These keypads are compatible with the latest version the folllowing DSC security systems: RFK55XX keypads combine a wireless receiver with the respective keypad. Temperature range: -10 to +55 (14 to 131 Temperature for UL/ULC: 0 to +49 (32 to 120 Humidity (MAX): 93%R.H. Plastic enclosure protection degree: IP30, IK04 Voltage rating: 12VDC nominal Connects to control panel via 4-wire Keybus 1 keypad zone input/PGM output* PK55XX Current draw: 50mA (standby)/125mA (maximum) RFK55XX Current draw: 75mA (standby)/135mA (maximum) Wall mount tamper 5 programmable function keys Ready (Green LED), Armed (Red LED), Trouble (Yellow LED), AC LED) Low temperature sensor Frequency: 433.92MHz (RFK55XX-433 )/868MHz (RFK55XX-868) Up to 32 wireless zones (RFK55XX Only) * Zone not to be programmed as Fire type or 24h type. Power keypad package includes the following parts: Power keypad mounting screws end-of-line resistors should mount the keypad where it is accessible to designated of entry and exit. Once you have selected a dry and secure loca- perform the following steps to mount the keypad. inner door labels tamper switch Instructions Keypad Insert a flat head screwdriver into the provided slot (first of two) Move screwdriver toward the back plastic and lift as in the below This will unhook one side of the front plastic. Repeat step # 1 and 2 on the second provided slot to disconnect front plastic and allow access for wiring. engage and Wire Keypad Out Slot Out Out to Snap Secure Keypad to wall using mounting holes. Use all 4 screws provided mounting on a single gang box. Place keypad into hooks on the backplate and swing down to engage. Run wire through wiring slot or knockouts. Connect Keybus and PG