DSC Spec Sheet – LC-103, LC-104

DSC LC Series of Detection Devices and Microwave Detector with Anti-Masking and Pet Immunity it a residential or commercial installation, LC series of detection devices readies a security for the unexpected by providing protection for room, corner and corridor. The LC-103-PIMSK, LC-104-PIMW and LC-124-PIMW are dual- motion detectors that combine passive infrared microwave detection with pet immunity. LC-103-PIMSK LC-123-PIMSK also support anti-masking. The feature prevents intruders from defeating the by covering its field of view. Features: (LC-103-PIMSK / LC-123-PIMSK) or alarm contact and tamper switch signal analysis immunity up to 55 lbs (25 kg) Linear Imaging Technology for sharp analysis of body and differentiation from backgrounds and pets detection based on Doppler concept microwave motion sensor module with micro-strip antenna ASIC-based electronics installation calibration free PIR/microwave sensitivity adjustment installation with or without swivel-mount bracket your DSC distributor LC Series of Detection Devices and Microwave Detector with Anti-Masking and Pet Immunity Protection ASIC-based processing provides both superior detection false alarm rejection to help keep people and possessions Quad Linear Imaging Technology provides sharp analysis of dimensions and differentiation from backgrounds and pets. Signal Processing motion detection is dependent on a sensor ability to intruders and provide true false alarm resistance. The LC of detection devices pinpoints intruders through digital signal Digital information is more accurately analyzed using and is not subject to signal degradation caused by noise, distortion or signal clipping. (LC-103-PIMSK, LC-123-PIMSK) LC-103-PIMSK and LC-123-PIMSK detectors feature PIR and sensors. The microwave sensor features two channels, for microwave (MW) detection, and the other for anti-masking The anti-masking feature works by sensing objects or that may block the detector field of view at a distance of (0.8 m) and closer. If the field of view of the detector is obscured by an intruder, the dedicated anti-masking opens (switches from NC to NO) and remains in this status the PIR sensor is activated Immunity accurate sensors are able to provide quality detection while the same time ignoring pets weighing up to 55 lbs (25 kg). and Easy Installation the detector is installed at the recommended height, installers conduct a brief walk-test, make any necessary adjustments, the unit is ready to perform. Highly visible LEDs can be viewed a glance and help the installer identify the detection range from distance or angle within the coverage pattern. Information: . . . . . . . . . . PIR and Microwave Detector with Anti-Masking and Pet Immunity (10.525 GHz) . . . . . . . . . . . PIR and Microwave Detector with Pet Immunity (10.525 GHz) . . . . . . . . . . PIR and Microwave Detector with Anti-Masking and Pet Immunity (10.525 GHz) . . . . . . . . . . . PIR and Microwave Detector with Pet Immunity (10.525 GHz) by: the Detector choosing a location for the detector, be sure to the following: Do not aim the detector at reflective surfaces Avoid locations that are subject to direct high air flow Do not locate the detector in the path of direct or sunlight Do not place next to large obstructions that may limit coverage area Range Adjustment detection range of the motion detector is adjustable about 10 to 40 (3 m to 12 m). A potentiometer can be clockwise or counter-clockwise to increase or the range respectively. For optimum range should be adjusted so that it protects the dimension