Gamewell-FCI ANX - Addressable Node Expander

File Preview
File Preview
Click below to download for free

File Data

Name gamewell-fci-anx-addressable-node-expander-7492356801.pdf
Type PDF
Size 895.60 KB
Downloads

Text Preview

Analog and Networking Systems Node Expander Gamewell FCI Addressable Node Expander ANX is a networking interface board is used to expand the overall E3 Series capabilities in the system node count integration and Ethernet connectivity This powerful interface provides data exchange between the following units E3 Series Fire Alarm Control Panel S3 Series Fire Alarm Control Panel FocalPoint Graphical Workstation Installer PC ANX allows the E3 Series and S3 Series Networks to expand to two rings Each contains up to 61 nodes not including the ANX By bridging the two networks each of the E3 and S3 network node counts are increased to 122 nodes The network expansion can activate outputs on any node on the bridged including the Control by Event functions originating from a connected See Figure 1 Shared Ring Capability Audio paging and voice messages are transferred over the two networks through the ANX use of the ANX Ethernet port allows the communication between the E3 Series the FocalPoint Gateways and Workstations through the TCP IP From the Workstation you can activate switches in the ANX for CAM control status monitoring which might include bypass control switching voice notification or any auxiliary control function can use the ANX Ethernet port for high speed configuration downloading either of the E3 Series or S3 Series rings saving time rather than using the typical connections The ANX can also be used as a downloading gateway for and is not required to be a part of the system BENEFITS Complies with UL 864 9th Expands the E3 and S3 to two rings 122 nodes a multi ring expansion Provides expanded exchanges the E3 and the Graphic Includes high speed Features Voice evacuation Allows the user to send Bridges two of either Provides up to 512 through ANX Ethernet port Installed in the E3 Series enclosures E3 Series or S3 Networks to outputs on any on bridged Offers shared ring Displays device for points events only Shows a single icon per device Points for control status monitoring FocalPoint for control switch circuit control Auxiliary control circuit Provides Ethernet to allow a speed Includes additional information to end to the Gateway following over the E3 Acknowledge Enable Disable Reset Silence Shows the current on the E3 and S3 Sends the time to the and S3 networks Node Series Node Series 1 Addressable Node Expander Connection in a Multi Ring Network Expansion Configuration Download program utility is provided to extract data the CAMs and voice files on the INI VG into a job file that allows the ANX to extract all information in existing panels The following list information that can be retrieved from the ANX Custom labels programmed to identify each point System information that details the configuration of addressable monitor and control points Information stored in the CAMWorks job file Compare feature to display configuration Converts low level CAMs into corresponding high CAMs during the download of the CAMWorks data for the following node types ILI MB E3 ILI95 MB E3 ANX ILI S E3 ILI95 S E3 NGA SLP Information Addressable Node Expander Multi Ring Optic ANX expands the operation of the E3 Series so that it can support both Mass Notification Emergency Communication System applications in the following building complexes campuses large industrial or manufacturing facilities high rise multi building complexes ANX sub assembly provides Ethernet connectivity an Ethernet port Addressable Node Expander Multi Ring Fiber Optic hospitals contains the following primary network interface for multi ring communication a fiber optic FO connectivity on the secondary network connection Addressable Node Expander uses TCP IP and heavy PPL PSL re use of the components The ANX sub assembly can Ethernet connectivity via an Ethernet port This port offers an enhanced network interface the E3 Series and S3 Series fire alarm control and the FocalPoint Graphic This feature improves the communication monitor the alarm supervisory and trouble of the FocalPoint Graphic Workstation The Series configuration data can be loaded into the nodes via the ANX Ethernet port and Technical Specifications Voltage 24 VDC from the PM 9 PM 9G supply Current 0.066 amp Current 0.066 amp Temperature 32 to 120 F 0 to 49 C Humidity 0 to 93 non condensing at 90 F C Specifications only Wire 16 to 18 AWG twisted pair unshielded to 3,000 feet 914.4 m between each node Cable ANX MR FO only Up to 200 optimized for 62.5 125 microns Up to 8 dB loss each node ANX is designed to comply with the following Standard UL 864 9th Edition LISTINGS AND APPROVALS listings and approvals apply to the modules in this document In some cases certain or applications may not be listed by certain agencies or listing may be in process Consult factory for the latest listing status Listed S1869 Approved 6175 Approved 3025415 7165 1703 0125 Dept of New York COA 6077 a complete listing of all approvals and please visit Series FocalPoint and are registered of Honeywell Inc is a trademark of International Inc is a registered trademark Underwriters Laboratories document is not intended be used for installation We try to keep our information up to and accurate We cannot all specific applications anticipate all requirements specifications are subject to without notice more information more about Gamewell FCI ANX and other products by visiting www Gamewell FCI com Gamewell FCI Clintonville Road CT 06472 1610 G 07 19 Honeywell International Inc

Related Files