Gamewell-FCI VESDA VIC-010 VESDAnet Interface Card

File Preview
File Preview
Click below to download for free

File Data

Name gamewell-fci-vesda-vic-010-vesdanet-interface-card-4258173960.pdf
Type PDF
Size 911.48 KB
Downloads

Text Preview

net Interface Card seamless VESDAnet communication and simple to install operation LEDs give visual indication the card status transferrable between detectors UL AFNOR ULC VESDAnet Interface Card VN Card is a simple interface card for range of VESDA LaserFOCUS VLF smoke detectors The VN Card seamless VESDAnet communication from the detector to other is VESDAnet is a fault tolerant proprietary VESDA communications protocol allows the VESDA range of smoke detectors displays and remote units to communicate with each other on network connect to VESDAnet a VESDAnet Interface Card into a LaserFOCUS detector and convenient communications with VESDA detectors or remote sites So rather than a technician having to connect to each they can communicate with all detectors on the network from a central location using a laptop also allows a system management package such as Xtralis VSM3 monitor and report on the status of all devices connected on VESDAnet central supervision management and control of all VESDA detectors displays and relays for the LaserFOCUS detector installing a VN Card in a LaserFOCUS detector remote displays and relays can be added to the LaserFOCUS This extends the capability Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use www gamewell fci com GF11416 03 page 1 of 2 Interface Card VESDA detectors to building management systems an appropriate High Level Interface HLI the information on VESDAnet be transmitted to 3rd party monitoring and control systems such as Management Systems BMS and Fire Alarm Control Panels FACP false alarms due to outside air pollution LaserFOCUS can be used as a cost effective reference detector for other as air pollution It works by offsetting the signal from the active detector the protected area with a reference signal from a detector monitoring the air intake to the area This results in the active detector measuring in smoke levels that are due only to events in the protected area than those external to the area all VESDA smoke detectors on a VESDAnet loop allows you to Consumption less than 1 W from the detector 24 VDC 42 mA x Width x Height mm x 2 13 16 mm x 13 16 mm lb 0.08 kg AWG 0.2 2.5 mm2 Conditions Ambient 32 to 104 0 to 40 to 95 non condensing Warranty years LaserFOCUS detectors can be interface However it is not possible to other detectors on VESDAnet through serial port Interface HLI must be connected to VESDAnet socket This socket is available VLP VLS and VLC 505 detectors a remote VESDAnet socket VRT 300 provides direct connectivity an HLI or a hand held programmer hand held programmer or High Level HLI module cannot be directly to a LaserFOCUS detector Information

Related Files