Category: Harrington Signal

HARRINGTON INC ALARM Fire Alarm Control Panel Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com models provide two SLCs support of 198 devices on each a total capacity of up to addressable devices; up to detectors and up to 198 modules total. modules mount directly to chassis and can be field installed. are available for NAC output circuits, relay output circuits, annunciation, additional power, and other fire alarm operations. Addressable Input Fire Control Panel provide flexible cost-effective operation to system requirements for both and capability. The design assures that as needs and applicable evolve, fire alarm control functions can be updated required. networking modules the HS-3200 to be to a Harrington network provide additional input circuits, zones, and relays. Up to 254 and annunciator units can networked together. The is a DCLR (Data Link, Redundant) loop. circuit the HS3200 consists two convenient and easy and special features as cross-zoning functions, mode, selective control etc.) is performed from externally generated database on a Windows based parameters and control display and operation are conveniently from the on-board and keypad. Information Number Part Number dual addressable input signaling line. SLC are selectable for either 6) or (Style 4). Two notification circuits A or B. Expandable to 8 with HS3NC2. Dialer Module (2) notification circuit modules (4) relay modules (8) LED modules Transformer Network board, Port 1 and Port 2 Standard Network board, Port 1 RS232 and Port 2 Standard Network board, Port 1 and Port 2 RS232 Network board, Port 1 standard and Port 2 RS232 main PC board (2) SLC – HS-3200 replacement 1 or 2 loop display PCB Transformer 120/240 VAC INC ALARM Fire Alarm Control Panel Listed to Standard 864, 9th “standard for Control Units Fire Protective Signaling provides Dual Input Signaling Line for up to 396 Addressable are selectable for either A (Style 6) or Class B (Style 4) (2) Notification Appliance (NACs), Class A (Style Z) or B (Style Y); expandable to (8) NACs with optional modules (4) programmable function Form C; expandable to (16) relays with HSRL4 cross-zoning day/night mode, and control operations (2) auxiliary power outputs, mA @ 24 VDC each A Power supply with integral charger provides 2.5 A for and Auxiliary Outputs; to provide up to 7 A Current additional ports for Dialer, Interface, Voice Evacuation and Remote Annunciators Style 7 (DCLR) HS Network to panel communications system status display with HSLD8 LED zone display mount cabinet with construction allows up 12 Ah batteries internally charger is capable of up to 35 Ah mounted in external battery cabinet doors are removable for installation program and can both be using a based PC with Programming Software event history log stores events Control Unit controls consist of eight switches, an LCD readout, display entry switches. The entry keypad is used for functions, maintenance, recall, device and circuit

HARRINGTON ALARM HS-3030 Addressable Fire Alarm Control Panel Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com Description HS-3030 is a sophisticated Fire Alarm Panel. It has the capability network with multiple HS-3030 annunciators to suit the needs of residential, industrial and applications. The HS- fire panel provides capability up to 24 input circuits, 4 purpose form relays, 3 operated relays (for Alarm, and Supervisory 8 class B (style Y) or 4 A (style Z) output bell circuits 2 auxiliary power outputs. circuit modules are available conventional or addressable in class A (styles D or or class B (styles B or 4). Programming HS-3030 panel’s database be downloaded or optional in the field from a connected to service using Network Plus All information is stored in flash memory. HS-3030 can be networked to HS-3030s, 3100s, and 3200 to provide additional circuits, relays, bells and LEDs. HS-3030 is designated the panel for the network. All other panels will operate if communications with master panel is lost. to UL864 9th Edition Capabilities yet Simple Operate and Addressable Circuits Stage Alarm Capability Person System Test Capability Programmable via Computer, and optional upload of Log Approximately 1000 LED for Alarm, Supervisory, Trouble Indication for Each Zone Supertwist Backlit 80 Character x 20) Display Fault Indication by Input Definable Conventional Circuits Supervision Conventional Input Class B (Style B) or Class A D) Available by Special Circuits Programmable for or N.C. Contacts B (Style Y) or Optional Class (Style Z) Bell Circuits Available by Order (Style 7) Network Option Sensitivity Adjustments, Alert for Dirty Sensitivity Adjustments, in Printer Available Information Number Part Number Style 4 (Class B) 4 Style 6 (Class A) or addressable SLC, 8MB Memory, 8 Class 120 VAC Operation inner door, 8 Style 4 (Class B) 4 Style 6 (Class A) or addressable SLC for power supply board for HS-3030 FACP Rev. 9 Style 4 (Class B) 4 Style 6 (Class A) or addressable SLC expander board (Takes up (1) – (2) maximum per system. Uses slots #2 & #3) communications board for HS-3030 FACP HS-3140 & HS-3434 annunciators to PORT 1 (COM 1) & PORT 2 (COM 2). Also used for panel and networking.) Need to add to all HS-3434 driver boards. on Last Page ALARM HS-3030 Addressable Fire Alarm Control Panel Inner Door system controls and indications are on the Mother which also contains system processor, port, printer and nonvolatile for system Custom software is on the main board functions such as relays, zone LED annunciation, and custom and device messages. The HS-3030 consist of system switches ( Keys and a 20 position keypad. The 12 system switches are defined for operations such as signal silence, and system reset. The position keypad is used for technical functions, maintenance, history recall, device and manual operation of addressable modules, relay modules, and bell circuits. Features Software Driven of Real Time Limited Circuits Protection Alarm, Trouble, and Supervisory LEDs Silence Inhibit Verification by Zone or Device Alarm, Supervisory, and Trouble Re

HARRINGTON INC. ALARM Tracker T2000 Alarm Control Panel Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com T2000 FACP FireSpy a modular design that can either addressable and/or con- The basic unit with built-in circuits, and can add Class B or 5 Class A conventional with or without a Dialer, all in the main FACP cabinet. different combinations of cabinets, the Tracker may expanded up 60 Class B or 30 A conventional zones. T2000 FACP contains two built-in that can be programmed for I-Spy / XP95 Series addressable (126 points per SLC) or Sensor addressable devices detectors / 99 modules). T2000 can be programmed from the keypad of FACP or from a PC with the package. Tracker T2000 FACP supports a Alarm Communicator (T-UDACT) that can be in the FACP enclosure or in remote enclosure. The T-UDACT either SIA or Contact ID to the Central Station. Information Number Part Number T-UDACT has a built-in speaker for feedback, which can be or disabled. Design Learn Programming programmable through on Panel or Null Modem Cable interface via PC Peer to Peer up to 250 panels a T8-P-N) will have 250 system groups 250 network groups (w/ optional module T-NCA) Printer Interface Non- Modules can be remotely placed bus provides communication modules Addressable Module supports SLC’s provide Drift have Flash / Non Flash LED per Detector Verification / Night Sensitivity Schedule for Schedule 20 days per year Intelligent IR E A LARM support I-Spy / XP95 (126 or System Sensor (198 protocol can be individual Protocol Module (T-CM) 5 A or 10 Class B zones per up to 30 Class A or Class B conventional zones (6 T- boards per system) Relay Module (T-SRM) 8 programmable relay Continued on Next Page Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95) Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95) w/ T-UDACT Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95) NAC Class A or B Network Card LCD Annunciator Board without Cabinet for T2000 & T8000 LCD Annunciator Board in Cabinet for the T2000 & T8000, Red Boards w/ 2 Programmable Relays, connects off the MCC or CM Module Boards. is needed to 1st T-RC board connection, 5 board limit per connection Control Assbly. incl. chassis, MCC, LCU, PDC, PC, & power supply RL980, 120VAC for T2-P & T2-P-D only Module Board w/ 10 Zones Class B or 5 Zones Class A Expander Cabinet boards to be placed in remote locations 1 T-CM board) Dialer or Contact ID) Information Continued on Next Page INC. ALARM Tracker T2000 Alarm Control Panel Information Continued Number Part Number 8000 FACP w/ T8-MBC & T-NCA in a T8-CAB (can be used as a Master for a T2000 Module Board Module Board in Expander Cabinet, 10 Class B or 5 Class A w/ 1 T-RC Board form C contacts – can hold up to 5 T-RC Relay Boards) Board Expander Cabinet Only – (can hold up to 5 T-RC Relay Boards) T-RC Relay Board in Expander Cabinet – (can h

HARRINGTON INC. ALARM Tracker T2000E Fire Alarm & Audio Control Panel Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com Tracker Fire FireSpy Control Panel (FACP) comes Circuits (SLC) and cannot be Built-In A Signaling T2000E can be configured with a 25, 50 or 100 Watt module Quality Audio with Fire Products in a single The Audio Speaker Circuits be either Class A or Class B. Audio portion of the panel can separated into 8 Class or 4 speaker circuits plus Remote microphone panels expander audio amplifier the Fire / Audio combination be configured to satisfy most digital message and tone is built the panel. The selection of alarm and automatic message can repeated with up to 4 conditions. 6 hour delay of AC power failure is available . These options all field configurable. T2000E FACP contains two Built-In SLC loops that can be for either I-Spy / XP95 devices (126 ports per or System Sensor addressable (99 detectors / 99 modules). Fire portion of the T2000E can program devices on an loop or program zones on your Additionally, the T2000E automatic drift com and is easily pro from either the fire or through the user friendly program software. Design Learn Programming programmable through on Panel or Null Modem Cable programming via PC Peer to Peer up to 250 (needs a T8-P-N) will have 250 system and 250 network groups (w/ network module T-NCA) Printer Interface Non- Modules can be remotely bus provides to modules Addressable Module 2 SLC’s provide Drift have Flash / Non Flash Option per Detector Verification / Night Sensitivity Schedule for Information Number Number Schedule 20 days per year Intelligent support I-Spy / XP95 (126 devices) System Sensor (198 devices) protocol can be individual Protocol Module (T-CM) 5 Class A 10 Class B zones per module Continued on Next Combo Voice Amplifier, Class B or Class A, Red Combo Voice Amplifier, Class B or Class A, Red Combo Voice Amplifier, Class B or Class A, Red 2 Class (A) speaker zone Splitter Card 4 Class (B) speaker zone Splitter Card Remote Serial Interface Card Audio Matching – line input / output card (Max 1 per cabinet) Supervised Card for remote Microphone in surface / semi-flush cabinet Supervisory Card for remote Microphone surface Battery Cabinet, Red surface Battery Cabinet, Red LCD Annunciator Board in Cabinet for the T2000 and T8000, Red Information Continued on Next Page INC. ALARM Tracker T2000E Fire Alarm & Audio Control Panel Number Number or Contact ID) Boards w/ 2 Programmable Relays, connects off the MCC or CM Module Boards. is needed to 1st T-RC board connection, 5 board limit per connection Control Assbly. incl. chassis, MCC, LCU, PDC, PC, & power supply RL980, 120VAC Module Board w/ 10 Zones Class B or 5 Zones Class A Expander Cabinet boards to be placed in remote locations 1 T-CM board)

HARRINGTON INC. ALARM Tracker T8000 Alarm Control Panel Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com feedback, which can be or disabled. Design Learn Programming programmable through on Panel or Null Modem Cable interface via PC Peer to Peer up to 250 will have 250 system groups 250 network groups (w/optional module T-NCA) Printer Interface Non- Modules can be remotely bus provides to modules Module (T-LCU) 2 SLC’s per module up to 4 T-LCU for total of 8 Addressable provide Drift 8000 FACP FireSpy a modular design that can either addressable and/or The basic unit be with 2 or 4 SLC circuits or 10 B / 5Class A conventional zones or without a Dialer, all installed in main FACP cabinet. different combinations of cabinets, the Tracker may expanded up to 8 SLC Circuits 60 Class B or zones. Class A addressable module T-LCU 2 SLC that can be for either I-Spy / XP95 addressable devices (126 per SLC) or System Sensor devices (99 detectors / modules). T8000 programmed from the keypad the FACP or from a PC with the package. Tracker T8000 FACP supports a AlarmCommunicator (T-UDACT) that can be in the FACP enclosure or in remote enclosure. The T-UDACT either SIA or Contact ID to the Central Station. The has a built in speaker for Information IR E A LARM have Flash / Non-Flash LED per Detector Verification / Night Sensitivity Schedule for Schedule 20 days per year Intelligent support I-Spy / XP95 (126 or System Sensor (198 protocol can be individual Protocol Module (T-CM) 5 Class or 10 Class B zones per module Continued on Next Page Number Part Number Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95 Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95 w/ T-UDACT Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95 Addressable SLC FACP, Class A or B (System Sensor / I-Spy / XP95 w/ T-UDACT FACP, 10 Zones Class B or 5 Zones Class A FACP, 10 Zones Class B or 5 Zones Class A w / T-UDACT T-LCU Addressable SLC Bd in Exp. Cabinet, Class B or Class A (System Sensor / I-Spy / XP95) T-LCU Addressable SLC Bd in Exp. Cabinet, Class B or Class A (System Sensor / I-Spy / XP95) Control Assembly, includes chassis, MCC, PDC, PC and power supply RL980, 120VAC Loop Addressable SLC Board for Class B or Class A (System Sensor / I-Spy / XP95) Module Board w/ 10 Zones Class B or 5 Zones Class A Expander Cabinet for boards to be placed in remote locations (holds 2 T-LCU oards T-SRM Board or T-CM oard) Information Continued on Next Page INC. ALARM Tracker T8000 Alarm Control Panel Information Continued Number Part Number for T8-P-U, T8-P-UD, T8-P-2U, T8-P-2UD, T8-P-C & T8-P-CD Module Bd in Expander Cabinet, 10 Class B or 5 Class A w/ 1 T-RC Board form C contacts – can hold up to 5 T-RC Relay Boards) Board Expander Cabinet

HARRINGTON INC. ALARM Tracker T1000 Alarm Control Panel Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com FireSpy Tracker T1000 FACP a modular design that with one built on SLC. The T1000 can conventional modules or relay added to the system. The enclosure has room for one T- module (5 Class A or 10 Class B zones) or one T-SRM (8 relays). The dialer is on to the T1000 mother board two RJ11 phone jacks for to the phone lines. different combinations of cabinets, the T1000 may expanded up to 30 Class A or Class B conventional zones and to 48 programmable relays. T1000 FACP contains one built- SLC that can be programmed for / XP95 series addressable (126 points of either or detectors on the SLC) or Sensor addressable devices detectors / 99 modules) or T-SPY detectors of 254 points on the FireSpy Tracker T1000 can be programmed from the keypad the FACP or from a PC (using the Information Number Part Number cable) with FireSpy package. Tracker T1000 FACP supports a Alarm Communicator that is built on to the The system supports either SIA Contact ID format to the Central The unit has a built-in speaker audible feedback, which can be or disabled. Design Learn Programming through on FACP supports 250 groups can be networked with module, 254 panels (T-NCA) Digital Alarm Communicator Compensation support I-Spy / XP95 (126 or System Sensor (198 or T-Spy 254 devices) Verification one Addressable SLC on Board Modules can be remotely placed Module (T-CM) 5 Class or 10 Class B zones per module supports up to 6 (T-CM) per system Relay Module (T-SRM) provides programmable relay contacts rated 10A @ 30VDC & 10A @ 250VAC load or 3A @ 250VAC load supports up to 6 T-SRM for a of 48 programmable relay Driver Module (T-LDV) provides to 255 outputs to drive lamps maybe LED or Incandescent (4 T-LDV per System) Remote annunciators (T-ANN) per reset programmable per annunciator can be set up as latching Continued on Next Page Addressable SLC FACP, Class A or B (T-Spy / I-Spy / System Sensor / XP95) Addressable SLC FACP, Class A or B (T-Spy / I-Spy / System Sensor / Xp95) w/Network LCD Annunciator Board without Cabinet for T1000, T2000 & T8000 LCD Annunciator Board in Cabinet for the T1000, T2000 & T8000, Red Boards w/ 2 Programmable Relays, connects off the MCC or CM Module Boards. is needed to 1st T-RC board connection, 5 board limit per connection Control Assbly. incl. chassis, MCC, LCU, PDC, PC, & power supply RL980, 120VAC for T1-P and T1-P-N only Module Board w/ 10 Zones Class B or 5 Zones Class A Expander Cabinet boards to be placed in remote locations 1 T-CM board) Module Board Relay Module Board w/ 8 Programmable Relays Information Continued on Next Page INC. ALARM Tracker T1000 Alarm Control Panel Information Continued Number Part Number Module Board in Expander Cabinet, 10 Class B or 5 Class A w/ 1 T-RC Board form C contacts – can hold up to 5 T-RC Relay Boards) Board Expander Cabinet Only – (can hold up to 5 T-RC Relay Boards) T-RC Relay Board in Expander Cabinet – (can hold up to 5 T-RC Relay Boards) or T-NCA Expander Cabinet Driver Module Board w/ up to 255

HARRINGTON INC. ALARM Signal Inc. 4th Avenue, Moline, Illinois 61265 Box 590, Moline, Illinois 61266-0590 (800) 577-5758 Local: (309) 762-0731 Fax: (309) 762-8215 www.harringtonfire.com Agent P110 Listed listing Pending loop addressable with PDACT standard operation of reset, silence, general alert, recall, and drill functions compensation pre-signal, positive alarm sequence and alarm verification by point with configuration functions or silent one-man walk test event history record station response time of 2 seconds maximun may be individually enabled or may be individually verified built-in NACs, expandable to 4 on-board relay outputs (alarm, trouble, Screen for main status display annunciation of off-normal indications Protection addressable SLC accepting up to 99 and 99 function modules amps available 2.0A – expandable to available per NAC built-in circuit Power 1 Amp standby, 2 Amp in Alarm Power Circuits – 1 resettable and 1 to a total of 9 annunciators I R E A LA RM contains an interface for a Agent P110 Fire Alarm System is designed for and ease of installations and SLC, has two built-in notification appliance (NACs), and three on-board relay outputs trouble, and supervisory alarm). The LCD provides annunciation and control the system. The Auto-Learn feature can be to quickly configure a system and system configuration can be done through the annunciator or with an PC interface. Options include: NAC meter display, remote relays, and a port (for connection to a PC). Information Number Part Number loop addressable FACP w/ PDACT 2NAC, 2AMPs loop addressable FACP w/ PDACT 2NAC, 6AMPs addressable FACP w/ PDACT 4NAC,6AMPS mother board Transformer NAC Circuit Board ID Dialer (replacement) Annunciator in cabinet 8 relay board in Cabinet Cabinet only Cabinet only Cabinet only INC. ALARM Agent P110 Annunciator for recessed mounting the local display of main panel display silence and reset functions buzzer by LCD screen of the system events and input/output system configuration parameters command entering by keyboard status indication by LEDs with main panel by RS485 internal network System status LEDs key keyboard Specifications remote annunciator shall be Harrington Signal FireSpy series P1-CAB-A which is designed for recess It shall mimic the local display of the main panel; silence and reset functions; a graphical LCD 20 key keyboard; 4 system status LEDs; piezo buzzer; normal power supply voltage of 24VDC; a current of 115mA; system status indication by LEDs. The information contained in this document is intended only as a summary and is subject to change without notice. The devices described in this document have instruction sheets which cover various technical, limitation and liability information. Copies of these instruction sheets and the General Product Warning and Limitations which also contains important information are provided with the product and are available from Harrington Signal Inc. Fire Alarm. should be consulted before specifying or using the product. For further information or assistance concerning particular problems contact Harrington Signal Inc. Signal Inc. Fire Alarm reserves the right to change specifications without notice. contained in these INC. ALARM Agent P110

No text preview available.