Home » Fire-lite ANN-LED
File preview
Click the button below to download immediately for free
Download “Fire-lite ANN-LED” Fire-lite_ANN-LED.pdf – Downloaded 0 times – 804 KB
Show text preview
ANN-LED Annunciator Module ANN-LED annunciator module provides LED annunciation of system faults and input zones/points when used with a com- Fire Alarm Control Panel (FACP). The ANN-LED module pro- alarm (red), (yellow) and supervisory (yellow) for up to ten input zones or addressable points. ANN- has red LEDs only for alarm communication of up to 30 points. ANN-LED is supplied standard with certain Canadian FACPs as by ULC. ANN-LED and the FACP communicate over a two-wire serial employing the ANN-Bus communication format. An addi- two wires are used for 24-volt DC power. A single four-con- unshielded cable may be used for both power and data to eight ANN-Bus devices may be connected to the ANN-Bus of FACP. ANN-LED connects to the ANN-Bus terminal on the FACP and minimal programming three LEDs for each zone: Alarm, Trouble and Supervi- Compatible with the ES-200X, ES-50X, MS-9600(UD)LS, MS- MS-9050UD, MS-5UD, MS-10UD, MRP-2001, and Can be remotely located up to 6,000 feet (1,829 m) from the May be powered by 24 VDC from the host FACP or by remote supply (requires 24 VDC) Maximum ANN-BUS Voltage: 24 VDC Maximum Current: Alarm: 68 mA Standby: 28 mA Maximum wiring distance from FACP: 6,000 ft. (1,829 m.) Ambient Temperature: 32 to 120 (0 to 49 Relative Humidity: 93% 2% RH (non-condensing) at 32 2 For use indoors in a dry location Connections to FACP are power-limited and supervised 5.160″ (13.11 cm.) high x 10.043″ (25.51 cm.) wide x 1.77″ (4.5 3 deep ANN-Bus THE DEVICES ON THE ANN-BUS FROM AUXIL- POWER SUPPLY devices can be powered by an auxiliary power supply available panel power is exceeded. See FACP manual for DEVICE ADDRESSING ANN-Bus device requires a unique address (ID Number) in to communicate with the FACP. A maximum of eight devices be connected to the FACP ANN-Bus communication circuit. See FACP manual for more information. B-105 Information annunciator module with alarm (red), trouble (yellow) supervisory (yellow) indication for up to ten input zones or points, includes module mounting bracket, metal cover clear plastic screen, rubber display/label holder, screws for the metal cover and the backbox, red enclosure same as above, with gray enclosure and white key- annunciator module with alarm (red) indicators for up 30 input zones or addressable points, includes red enclosure same as above, with gray enclosure and white key- Listings and Approvals listings and approvals below apply to the ANN-LED. In some certain modules may not be listed by certain approval agen- or listing may be in process. Consult factory for latest listing UL: S2424 ULC: S2424 (ANN-LED only) FM approved CSFM: 7120-0075:0222 MEA: 333-07-E Fire Dept of NY: COA #6177 3/15/2018 Page 1 of 2 Alarms is a registered trademark of Honeywell International Inc. by Honeywell International Inc. All rights reserved. Unauthorized use of this is strictly prohibited. document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. cannot cover all specific applications or anticipate all requirements. specifications are subject to change without notice. more information, contact Fire Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. of Origin: USA 2 of 2 DF-60241:E 3/15/2018
ANN-LED Annunciator Module ANN-LED annunciator module provides LED annunciation of system faults and input zones/points when used with a com- Fire Alarm Control Panel (FACP). The ANN-LED module pro- alarm (red), (yellow) and supervisory (yellow) for up to ten input zones or addressable points. ANN- has red LEDs only for alarm communication of up to 30 points. ANN-LED is supplied standard with certain Canadian FACPs as by ULC. ANN-LED and the FACP communicate over a two-wire serial employing the ANN-Bus communication format. An addi- two wires are used for 24-volt DC power. A single four-con- unshielded cable may be used for both power and data to eight ANN-Bus devices may be connected to the ANN-Bus of FACP. ANN-LED connects to the ANN-Bus terminal on the FACP and minimal programming three LEDs for each zone: Alarm, Trouble and Supervi- Compatible with the ES-200X, ES-50X, MS-9600(UD)LS, MS- MS-9050UD, MS-5UD, MS-10UD, MRP-2001, and Can be remotely located up to 6,000 feet (1,829 m) from the May be powered by 24 VDC from the host FACP or by remote supply (requires 24 VDC) Maximum ANN-BUS Voltage: 24 VDC Maximum Current: Alarm: 68 mA Standby: 28 mA Maximum wiring distance from FACP: 6,000 ft. (1,829 m.) Ambient Temperature: 32 to 120 (0 to 49 Relative Humidity: 93% 2% RH (non-condensing) at 32 2 For use indoors in a dry location Connections to FACP are power-limited and supervised 5.160″ (13.11 cm.) high x 10.043″ (25.51 cm.) wide x 1.77″ (4.5 3 deep ANN-Bus THE DEVICES ON THE ANN-BUS FROM AUXIL- POWER SUPPLY devices can be powered by an auxiliary power supply available panel power is exceeded. See FACP manual for DEVICE ADDRESSING ANN-Bus device requires a unique address (ID Number) in to communicate with the FACP. A maximum of eight devices be connected to the FACP ANN-Bus communication circuit. See FACP manual for more information. B-105 Information annunciator module with alarm (red), trouble (yellow) supervisory (yellow) indication for up to ten input zones or points, includes module mounting bracket, metal cover clear plastic screen, rubber display/label holder, screws for the metal cover and the backbox, red enclosure same as above, with gray enclosure and white key- annunciator module with alarm (red) indicators for up 30 input zones or addressable points, includes red enclosure same as above, with gray enclosure and white key- Listings and Approvals listings and approvals below apply to the ANN-LED. In some certain modules may not be listed by certain approval agen- or listing may be in process. Consult factory for latest listing UL: S2424 ULC: S2424 (ANN-LED only) FM approved CSFM: 7120-0075:0222 MEA: 333-07-E Fire Dept of NY: COA #6177 3/15/2018 Page 1 of 2 Alarms is a registered trademark of Honeywell International Inc. by Honeywell International Inc. All rights reserved. Unauthorized use of this is strictly prohibited. document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. cannot cover all specific applications or anticipate all requirements. specifications are subject to change without notice. more information, contact Fire Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. of Origin: USA 2 of 2 DF-60241:E 3/15/2018