Home » Fire-Lite ARA-10 Agent Release Station
File preview
Click the button below to download immediately for free
Show text preview
June 26, 1998 & AR-10F Release Manual Stations Conventional Initiating Devices Fire Fire(cid:149)Lite AR Series of Agent Release Manual Sta- is designed for use with the Sensiscan 2000 and Agent Release Control Panels. Based on the BG-10 Series of Manual Fire Alarm Stations, the Series provides dual-action, normally open contact, initiating points. The ARA-10 also includes a abort switch, System Activated (release) LED and Normal LED. Impact-resistant, durable LEXAN (or polycarbonate housing. Backplate made of 16 gauge steel. Highly visible. Easily operated (within ADA 5 lb. pull force when used break tube (cid:151) models manufactured after 10-1- identified by an under station spring). Attractive shape with textured finish. ARA-10 includes: Manual release, dual-action. Manual abort switch. System Activated (release) LED. System Normal (power-on) LED. AR-10F includes: Manual release, dual-action only. AR Series agent release manual stations are in- for use as release initiating devices with Fire(cid:149)Lite 2000 and MRP-4424 agent release control pan- These stations are ideally suited for areas such as rooms and computer rooms, where a chemical agent used to extinguish a fire. The AR Series stations should installed in compliance with applicable NFPA stan- local building codes, and plans and specifications. AR-10F agent release manual station mounts to a single-gang electrical box or SB-10 surface-mount The ARA-10 requires a custom backbox for mount- (cid:151) model SBA-10. A terminal block with screws is for fast and easy wiring of the agent release is a registered trademark of GE Plastics, a subsidiary General Electric Company. the handle down causes the AR Stations to latch in down position and to close the normally open release switch. The handle is restored manually by un- the allen-head screw so the top of the case can forward, allowing the spring-loaded handle to return its normal position. The case can then be pivoted back its normal position and secured with the allen-head document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 LINE INFORMATION Release Manual Station, dual action. terminal block with screws for fast easy wiring of agent release circuit. as above with manual abort switch, Activated (release) LED and System (power-on) LED. backbox for AR-10F. backbox for ARA-10. for ARA-10 ELR on last unit. 2 of 2 (cid:151) DF-51230 (rear view) Agent Release Manual Station view on page 1)
June 26, 1998 & AR-10F Release Manual Stations Conventional Initiating Devices Fire Fire(cid:149)Lite AR Series of Agent Release Manual Sta- is designed for use with the Sensiscan 2000 and Agent Release Control Panels. Based on the BG-10 Series of Manual Fire Alarm Stations, the Series provides dual-action, normally open contact, initiating points. The ARA-10 also includes a abort switch, System Activated (release) LED and Normal LED. Impact-resistant, durable LEXAN (or polycarbonate housing. Backplate made of 16 gauge steel. Highly visible. Easily operated (within ADA 5 lb. pull force when used break tube (cid:151) models manufactured after 10-1- identified by an under station spring). Attractive shape with textured finish. ARA-10 includes: Manual release, dual-action. Manual abort switch. System Activated (release) LED. System Normal (power-on) LED. AR-10F includes: Manual release, dual-action only. AR Series agent release manual stations are in- for use as release initiating devices with Fire(cid:149)Lite 2000 and MRP-4424 agent release control pan- These stations are ideally suited for areas such as rooms and computer rooms, where a chemical agent used to extinguish a fire. The AR Series stations should installed in compliance with applicable NFPA stan- local building codes, and plans and specifications. AR-10F agent release manual station mounts to a single-gang electrical box or SB-10 surface-mount The ARA-10 requires a custom backbox for mount- (cid:151) model SBA-10. A terminal block with screws is for fast and easy wiring of the agent release is a registered trademark of GE Plastics, a subsidiary General Electric Company. the handle down causes the AR Stations to latch in down position and to close the normally open release switch. The handle is restored manually by un- the allen-head screw so the top of the case can forward, allowing the spring-loaded handle to return its normal position. The case can then be pivoted back its normal position and secured with the allen-head document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 LINE INFORMATION Release Manual Station, dual action. terminal block with screws for fast easy wiring of agent release circuit. as above with manual abort switch, Activated (release) LED and System (power-on) LED. backbox for AR-10F. backbox for ARA-10. for ARA-10 ELR on last unit. 2 of 2 (cid:151) DF-51230 (rear view) Agent Release Manual Station view on page 1)