Fire-Lite BG 10 Series Manual Pull Station PID

Note: The switch rating is 3 amps @ 30 Volts AC/DC Denotes solder connection BG-10L, BG-10WP, HR-10, AR-10F Series Pull Station Installation Drawing 15486 Rev: F 9/04/96 ECN 96-323 contact for functions control panel loop output control panel loop output next device or ELR control panel loop output next device or ELR terminal block tests – or to circuit operated). control panel loop output next device or ELR next device or ELR BG-10 Series Pull Stations are non-coded, dual-action, normally-open manual pull stations with the following options: (with AUX. switch); BG-10L (with key for reset); BG-10P/T (with key for presignal or test); BG-10N (without terminal BG-10WP (BG-10 enclosed in a weatherproof backbox); HR 10 (Halon Release, with wiring the same as the BG-10); (Agent Release, with wiring the same as the BG-10). Series Operation the dual-action door is pushed in and the handle pulled down, the N.O. push-type switches will close. The handle cannot restored to its normal position until the station is manually reset by unscrewing the hex screw and pivoting the case away from the backplate. When the handle is restored, return the case to its normal position and secure with the screw. Note: The BG-10L utilizes a mechanical key instead of a hex screw. The microswitch of the BG-10P/T is activated rotating a key clockwise. The key cannot be removed while in this position. Clintonville Road, Northford, CT 06472 203-484-7161 203-484-7118