Home » Fire-Lite BG-12LSP Manual Pull Station
File preview
Click the button below to download immediately for free
Show text preview
Wiring + NEXT IDC Pull Station 50964-3 Manual Pull Station U.S. Patent No. Des. 428,351; 6,380,846; Other Patents Pending 2 3 4 GAUGE 50964-3 BG-12LSP pull station is a non-coded, dual-action manual pull station with a key-lock feature and dual language (Spanish/English) labeling and operating instructions. It Fire control panels with one normally open (N/O) alarm initiating input. BG-12LSP meets the ADAAG controls and operating mechanisms guidelines (section and the ADA requirement for a 5 lb. maximum pull force to activate the pull Molded Terminal numbers are also present. contact (N/O) is gold plated for reliability and rated at 0.25 A at 30 volts (AC or BG-12LSP pull station can be surface mounted to an SB-10 or SB-I/O surface backbox semi-flush mounted on a standard single-gang, double-gang or 4 (10.16 cm) square box. The optional BG-TR trim ring can be used if the BG-12LSP is to be semi- mounted. activate the dual-action pull station, push in and pull down on the handle. The word appears after the handle is pulled down. This will remain until the pull sta- is reset. pull station includes one Single Pole, Single Throw (SPST) Normally Open (N/O) which closes upon activation of the pull station. the Pull Station Insert the key into the lock and rotate 1/4 turn counterclockwise. Open the door until the handle returns to normal. Close and lock the door. Closing the door automatically resets the switch to the position. Open- the door will not activate or deactivate the alarm switch. DO NOT LOOP WIRING ANY TERMINALS. BREAK WIRE TO MAINTAIN IDC SUPERVISION. Do not loop wiring under any Break wire run to IDC supervision. Do not detach the door of the pull station during installation. The door of pull station cannot be reattached to the backplate after the backplate has already been onto an electrical box. the Fire BG-12LSP pull station in accordance with these instructions, NFPA standards, national and local Fire and Electrical codes and the requirements the AHJ (Authority Having Jurisdiction). Regular testing of the devices should be con- in accordance with the appropriate NFPA standards. Failure to follow these directions result in failure of the device to report an alarm condition. Fire is not responsible for that have been improperly installed, tested or maintained. Compliance ADA compliance, if the clear floor space only allows forward approach to an object, the forward reach height allowed is 48 inches (121.92 cm). If the clear floor space parallel approach by a person in a wheelchair, the maximum side reach allowed is inches (137.16 cm). + EL IDC 2 3 4 GAUGE Estaci Pulsadora Manual U.S. Patent No. Des. 428,351; 6,380,846; Other Patents Pending 50964-3 estaci pulsadora BG-12LSP es una estaci no c y de doble acci manual la caracter de reajuste de una cerradura de llave, la cual incluye un duo de lengua etiquetado e Instrucciones de operaci Esta provee a los paneles de de Fire con una alarma de iniciaci de entrada normalmente abierta (N/O). El reune las normas de control y funcionamiento de la ADAAG ( secci 4.1.3 [13]) los requisitos de ADA para que la estaci pulsadora sea activada con una fuerza de jale de 5 libras. Los n moldeados de las terminales tambi est presentes. de Contacto del Interruptor contacto del interruptor (N/O) es oro plateado para la confiabilidad y clasificado en 0.25 A 30 voltios (AV o DC). estaci pulsadora BG-12LSP puede se montada en la superficie del respaldo de un SB-10 un SB-I/O; esta tambi puede ser semi-montada en una caja el cuadrada ya sea indi- o doble de 4 (10.16 cm
Wiring + NEXT IDC Pull Station 50964-3 Manual Pull Station U.S. Patent No. Des. 428,351; 6,380,846; Other Patents Pending 2 3 4 GAUGE 50964-3 BG-12LSP pull station is a non-coded, dual-action manual pull station with a key-lock feature and dual language (Spanish/English) labeling and operating instructions. It Fire control panels with one normally open (N/O) alarm initiating input. BG-12LSP meets the ADAAG controls and operating mechanisms guidelines (section and the ADA requirement for a 5 lb. maximum pull force to activate the pull Molded Terminal numbers are also present. contact (N/O) is gold plated for reliability and rated at 0.25 A at 30 volts (AC or BG-12LSP pull station can be surface mounted to an SB-10 or SB-I/O surface backbox semi-flush mounted on a standard single-gang, double-gang or 4 (10.16 cm) square box. The optional BG-TR trim ring can be used if the BG-12LSP is to be semi- mounted. activate the dual-action pull station, push in and pull down on the handle. The word appears after the handle is pulled down. This will remain until the pull sta- is reset. pull station includes one Single Pole, Single Throw (SPST) Normally Open (N/O) which closes upon activation of the pull station. the Pull Station Insert the key into the lock and rotate 1/4 turn counterclockwise. Open the door until the handle returns to normal. Close and lock the door. Closing the door automatically resets the switch to the position. Open- the door will not activate or deactivate the alarm switch. DO NOT LOOP WIRING ANY TERMINALS. BREAK WIRE TO MAINTAIN IDC SUPERVISION. Do not loop wiring under any Break wire run to IDC supervision. Do not detach the door of the pull station during installation. The door of pull station cannot be reattached to the backplate after the backplate has already been onto an electrical box. the Fire BG-12LSP pull station in accordance with these instructions, NFPA standards, national and local Fire and Electrical codes and the requirements the AHJ (Authority Having Jurisdiction). Regular testing of the devices should be con- in accordance with the appropriate NFPA standards. Failure to follow these directions result in failure of the device to report an alarm condition. Fire is not responsible for that have been improperly installed, tested or maintained. Compliance ADA compliance, if the clear floor space only allows forward approach to an object, the forward reach height allowed is 48 inches (121.92 cm). If the clear floor space parallel approach by a person in a wheelchair, the maximum side reach allowed is inches (137.16 cm). + EL IDC 2 3 4 GAUGE Estaci Pulsadora Manual U.S. Patent No. Des. 428,351; 6,380,846; Other Patents Pending 50964-3 estaci pulsadora BG-12LSP es una estaci no c y de doble acci manual la caracter de reajuste de una cerradura de llave, la cual incluye un duo de lengua etiquetado e Instrucciones de operaci Esta provee a los paneles de de Fire con una alarma de iniciaci de entrada normalmente abierta (N/O). El reune las normas de control y funcionamiento de la ADAAG ( secci 4.1.3 [13]) los requisitos de ADA para que la estaci pulsadora sea activada con una fuerza de jale de 5 libras. Los n moldeados de las terminales tambi est presentes. de Contacto del Interruptor contacto del interruptor (N/O) es oro plateado para la confiabilidad y clasificado en 0.25 A 30 voltios (AV o DC). estaci pulsadora BG-12LSP puede se montada en la superficie del respaldo de un SB-10 un SB-I/O; esta tambi puede ser semi-montada en una caja el cuadrada ya sea indi- o doble de 4 (10.16 cm