Fire-Lite BG-12LX

BG-12LX Manual Pull Station Fire BG-12LX is a state-of-the-art, dual-action (i.e., two motions to activate the station) pull station that an addressable addressable fire alarm control panels (FACPs) the BG-12LX is addressable, the control panel can the exact location of the activated manual station. This fire personnel quickly to the location of the alarm. (mounted Maintenance personnel can open station for inspection and setting without causing an alarm condition. Built-in bicolor LED, which is visible through the handle of station, flashes in normal operation and latches steady when in alarm. Handle latches in down position and the word to clearly indicate the station has been operated. Captive screw terminals wire-ready for easy connection to loop (accepts up to 12 AWG/3.25 mm wire). Can be surface mounted (with SB-10 or SB-I/O) or semi- mounted. Semi-flush mount to a standard single- double-gang, or 4″ (10.16 cm) square electrical box. Smooth dual-action design. Meets ADAAG controls and operating mechanisms guide- (Section 4.1.3[13]); meets ADA requirement for 5 lb. activation force. Highly visible. Attractive shape and textured finish. Key reset. Optional trim ring (BG12TR). Meets UL 38, Standard for Manually Actuated Signaling Braille text on station handle. door, and handle are molded of durable polycarbonate with a textured finish. Shipping Weight: 9.6 oz. (272.15 g) Normal operating voltage: 24 VDC. Maximum SLC loop voltage: 28.0 VDC. Maximum SLC standby current: 375 Maximum SLC alarm current: 5 mA. Temperature Range: 32 to 120 (0 to 49 Relative Humidity: 10% to 93% (noncondensing) For use indoors in a dry location BG-12LX will mount semi-flush into a single-gang, double- or standard 4″ (10.16 cm) square electrical outlet box, or surface mount to the model SB-10 or SB-I/O surface back- If the BG-12LX is being semi-flush mounted, then the trim ring (BG12TR) may be used. The BG12TR is E-100 Devices needed for semi-flush mounting with 4″ (10.16 cm) or boxes (not with single-gang boxes). in, then pulling down on the handle causes it to latch the down/activated position. Once latched, the word (in bright yellow) appears at the top of the handle, a portion of the handle protrudes from the bottom of the To reset the station, simply unlock the station with the and pull the door open. This action resets the handle; clos- the door automatically resets the switch. manual station, on command from the control panel, data to the panel representing the state of the manual Two rotary decimal switches allow address settings 159 with Breakaway Tab removed for MS-9600 Series, 1 and MS-9200UDLS, 1 50 for MS-9050UD). Fire Alarm Stations shall be non-coded, with a key- reset lock in order that they may be tested, and so that after actual Emergency Operation, they cannot restored to normal except by use of a key. An operated sta- shall automatically condition itself so as to be visually as activated. Manual stations shall be constructed of polycarbonate material with clearly visible operat- instructions provided on the cover. The word FIRE shall on the front of the stations in white letters, 1.00 inches cm) or larger. Stations shall be suitable for surface on matching backbox SB-10 or SB-I/O; or semi-flush on a standard single-gang, double-gang, or (10.16 cm) square electrical box, and shall be installed 4/13/2012 Page 1 of 2 the limits defined by the Americans with Disabilities Act or per national/local requirements. Manual Stations be Underwriters Laboratories listed. stations shall connec