Fire-Lite CDRM-300(A)

Relay/Monitor Module E-840 Devices CDRM-300(A) multi output-input module is designed for with Fire Fire Alarm Control Panels. addressable module is intended for use in intelligent, two- loops. It includes two individual relay control modules and Class B monitor modules. Each relay output is intended for C switching applications which do not require wiring for the load circuit. Each monitor input provides an between a fire alarm control panel and one or more open contact-type devices. Each relay output has its green LED. Powered by SLC loop directly, no external power required. Mounts in standard junction boxes (4.0″/10.16 cm square, cm deep). LEDs flash red during normal operation and latch on red to indicate alarm. Compatible with LiteSpeed and CLIP systems. Addressable-analog communication. Sleek, low-profile design. Two-wire SLC connection. Rotary, decimal addressing: 01-159 with MS-9600UDLS MS-9600LS series systems, and 01-99 with MS- Firmware 4. Addresses can be viewed and changed without electronic Temperature: 32 to 120 (0 to 49 Humidity: 10% 93% non-condensing. 4.675″ H x 4.275″ W x 1.4″ D. (Mounts to a 4″ square by deep box.) Weight: 6.3 oz. (178.6 grams). SPECIFICATIONS Operating Voltage: 15 to 32 VDC. Current Draw: 24 mA (4 LEDs on). Operating Current: 1300 Contact Ratings: A A A A A A A A VAC VDC VDC VDC VAC VDC VAC VAC APPLICATION = 0.35 = 20ms) = 0.35 = 0.75 = 0.35 and Programming installation instructions shipped with the module, and the Wiring Manual for complete details. To ensure proper these modules shall be connected to listed compat- system control panels only. Mount on a standard junction box (4.0″/10.16 cm square) is at least 2.125″/5.398 cm deep. instructions are provided with each module. Terminal screws are provided for and out wiring. Surface-mount box is available as an option. Addressing: Module base address=Relay Output #1 Module base address +1=Monitor Input #1 Module base address +2=Relay Output #2 Module base address +3=Monitor Input #2 module can use up to four (4) addresses. The base selected with the rotary address switches will be to relay output #1 from 00 to 156. The module will assign the next three addresses as appropriate monitored input #1, relay output #2, and monitored input #2. switch settings can disable relay output #2 or monitored #2 and free up those addresses. (NOTE: This will affect see installation manual for details.) The inputs and outputs on CDRM-300(A) provide Style B B) circuits ONLY. Style D (Class A) circuits are NOT sup- in any application. Listings and Approvals listings and approvals apply to the modules specified in document. In some cases, certain modules or applications not be listed by certain approval agencies, or listing may in process. Consult factory for latest listing status. UL/ULC Listed: S2424 CSFM: 7300-0075:0225 01/10/2012 Page 1 of 2 Line Information suffix indicates ULC Listed model. Dual Relay/Monitor Module. Same as above but with ULC Listing. Surface-mount electrical box. Alarms is a registered trademark of Honeywell International Inc. by Honeywell International Inc. All rights reserved. Unauthorized use this document is strictly prohibited. document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. cannot cover all spec