Fire-Lite CELL-CAB-FL and CELL-MOD Datasheet

CELL-CAB-FL(C) and Fire Alarm Communicators CELL-CAB-FL(C) and CELL-MOD(C) are cellular communica- options for Fire Endurance Series addressable fire alarm panels (FACPs). GSM communicators provide cellular communication as an method of central station reporting. Combined with the onboard communicator, they provide dual path cellular and reporting capability, while eliminating the need and cost of sepa- dialer capture modules and special programming. Battery from the control panel maximizes overall system efficiency. in size, easy to install, with a programmable supervision time 1-60 minutes, these communicator models can be positioned from the fire alarm control panel via 4-wire serial bus for reception. The CELL-CAB-FL(C) and CELL-MOD(C) are 864 and NFPA 72 fire code compliant for sole, primary, or communications. They work with AlarmNet to provide a connection to the central station. CELL-CAB-FL(C) includes a GSM communicator within a metal enclosure with lock and key and includes an external The CELL-MOD(C) houses the GSM communicator in a enclosure and has an option for an external antenna. CELL-CAB-FL(C) and CELL-MOD(C) are compatible with the Endurance Series FACPs: ES-50X(C): 50 point addressable FACP ES-200X(C): 198 point addressable FACP Communicate directly with Endurance Series panels Easy installation – no need for special programming or separate module Battery backup provided by the panel to increase system effi- and decrease cost Provide dual-path cellular and IP reporting capability UL 864 and NFPA 72 code compliant for sole, primary, and communications Easily managed accounts through on-line management tools Remote mounting up to 6,000 feet (1,828.8m) Quality of Service (QOS) diagnostics via AlarmNet convey vital information such as when messages are received, strength, and message path used Programmable supervision time from 1-60 minutes Provide full data reporting using Contact ID format 11/5/2018 Page 1 of 2 SPECIFICATIONS 10.38″W x 10.165″H x 3.176″D x 25.82 cm x 8.07cm) 7.809″W x 5.982″H x 1.5″D x 15.19cm x 3.81cm) Weight: CELL-MOD: 1.3 lbs (589.7 g) CELL-CAB-FL: 5.2 lbs (2.36 Kg) Red Temperature: 32 to 120 (0 to 49 10 to 93% relative humidity (non-condensing) Current: 55mA Current: 100mA TRANSCEIVER 3G Cellular Radio UMTS WCDMA FDD 850/1900MHz FCC part 15, 22, 24, and 68 compliant PROTOCOLS HSPA+ (4G) and HSPA (HSDPA & HSUPA) (3G) INFORMATION Cellular module housed in metal cabinet with lock key. Includes external antenna Cellular module housed in metal cabinet with lock key. Includes external antenna. For use in Canadian applica- with Canadian model FACPs. Cellular module housed in plastic enclosure. (External sold separately) Cellular module housed in plastic enclosure. (Exter- antenna sold separately), For use in Canadian applications with model FACPs. 3dB gain external/remote antenna 50 point addressable FACP with pre-installed IPOTS-COM 50 point addressable FACP with pre-installed IPOTS- communicator, for use in Canadian applications 198 point addressable FACP with pre-installed IPOTS- communicator 198 point addressable FACP with pre-installed IPOTS- communicator, for use in Canadian applications Dual board) for the Endurance Series panels UL: S3511 (CELL-MOD), S2424 (CELL-CAB-FL) ULC: S3511 (CELL-MODC), S2424 (CELL-CAB-FLC) CSFM: 7300-0075:0504 FCC ID: CFS8DLPHS8-US (POTS and communicator and Fire-Lite Alarms are registered trademarks of Honeywell Inc. by Honeywell International Inc. All rights reserved. Unauthorized use of this