Home » Fire-Lite D355PL
File preview
Click the button below to download immediately for free
Download “Fire-Lite D355PL” Fire-Lite_D355PL.pdf – Downloaded 0 times – 2 MB
Show text preview
I FireLite Place CT 06472 203.484.7161 AND MAINTENANCE INSTRUCTIONS Duct Smoke Detector Temperature: Temperature: Velocity: Footprint Dimensions: Footprint Dimensions: Voltage Range: Current: Alarm Current (LED on): to 158 ( to 70 to 120 (0 to 49 with module installed in the D355PL to 158 ( to 70 to 93% Relative Humidity Non-condensing to 4000 ft./min. (0.5 to 20.3 m/sec.) in L in W in D (37 cm L cm W cm D) in L in W in D (19.7 cm L cm W cm D) pounds; 0.82 kg to 32 VDC @ 24 VDC (one communication every 5 seconds with LED blink enabled) mA @ 24 VDC CURRENT LOADS AT 24 VDC Max. Max. Max. The D355PL come with the sensor head factory installed, part number SD355R. of Contents Limitations of Duct Smoke Detectors . . . . . . . . . . . . . . . . . . . . . . . . .1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Contents of the Duct Smoke Detector Kit . . . . . . . . . . . . . . . . . . . . . .1 Detector Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Sampling Tube Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Measurement Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Field Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Verification of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dectector Cleaning Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Sensor Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 INSTALLINg the System Sensor Guide for Proper Use of Smoke Detectors in Duct Appli- (A05-1004), which provides detailed information on detector spacing, zoning, wiring, and special applications. Copies of this manual available online at www.systemsensor.com. NFPA Standards 72 and 90A also be referenced for detailed information. This manual shall be left with the owner/user of this equipment. This detector must be tested and maintained regularly following 72 requirements. The detector should be cleaned at least once a year. Of DUCT SMOkE DETECTORS National Fire Protection Association has established that DUCT DETEC- MUST NOT BE USED AS A SUBSTITUTE FOR OPEN AREA DETECTOR as a means of providing life safety. Nor are they a substitute for warning in a building regular fire detection system. Sensor supports this position and strongly recommends that the user NFPA Standards 90A, 72, and 101. The D355PL Air Duct Smoke Detectors listed per UL 268A. device will not operate without electrical power. Fire situations may an interruption of power. The system safeguards should be discussed your local fire protection specialist. device will not sense smoke unless the ventilation system is operating the cover is installed. this detector to function properly, it MUST be installed according to the in- in this manual. Furthermore, the detector MUST be operated within electrical and environmental specifications listed in this manual and the head installation manual. Failure to comply with these requirements prevent the detector from activating when smoke is present in the air duct. DESCRIPTION introduced into this air duct system will be distributed throughout the building. Smoke detectors designed for use in air duct systems are used sense the presence of smoke in the duct. D355PL Air Duct Smoke Detector utilizes photoelectric technology for detection of smoke. This detection method, when combined with an ef- housing design, samples air passing through the duct and allows detec- of a developing hazardous condition. When sufficient smoke is sensed, alarm signal is initiated at t
I FireLite Place CT 06472 203.484.7161 AND MAINTENANCE INSTRUCTIONS Duct Smoke Detector Temperature: Temperature: Velocity: Footprint Dimensions: Footprint Dimensions: Voltage Range: Current: Alarm Current (LED on): to 158 ( to 70 to 120 (0 to 49 with module installed in the D355PL to 158 ( to 70 to 93% Relative Humidity Non-condensing to 4000 ft./min. (0.5 to 20.3 m/sec.) in L in W in D (37 cm L cm W cm D) in L in W in D (19.7 cm L cm W cm D) pounds; 0.82 kg to 32 VDC @ 24 VDC (one communication every 5 seconds with LED blink enabled) mA @ 24 VDC CURRENT LOADS AT 24 VDC Max. Max. Max. The D355PL come with the sensor head factory installed, part number SD355R. of Contents Limitations of Duct Smoke Detectors . . . . . . . . . . . . . . . . . . . . . . . . .1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Contents of the Duct Smoke Detector Kit . . . . . . . . . . . . . . . . . . . . . .1 Detector Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Sampling Tube Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Measurement Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Field Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Verification of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dectector Cleaning Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Sensor Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 INSTALLINg the System Sensor Guide for Proper Use of Smoke Detectors in Duct Appli- (A05-1004), which provides detailed information on detector spacing, zoning, wiring, and special applications. Copies of this manual available online at www.systemsensor.com. NFPA Standards 72 and 90A also be referenced for detailed information. This manual shall be left with the owner/user of this equipment. This detector must be tested and maintained regularly following 72 requirements. The detector should be cleaned at least once a year. Of DUCT SMOkE DETECTORS National Fire Protection Association has established that DUCT DETEC- MUST NOT BE USED AS A SUBSTITUTE FOR OPEN AREA DETECTOR as a means of providing life safety. Nor are they a substitute for warning in a building regular fire detection system. Sensor supports this position and strongly recommends that the user NFPA Standards 90A, 72, and 101. The D355PL Air Duct Smoke Detectors listed per UL 268A. device will not operate without electrical power. Fire situations may an interruption of power. The system safeguards should be discussed your local fire protection specialist. device will not sense smoke unless the ventilation system is operating the cover is installed. this detector to function properly, it MUST be installed according to the in- in this manual. Furthermore, the detector MUST be operated within electrical and environmental specifications listed in this manual and the head installation manual. Failure to comply with these requirements prevent the detector from activating when smoke is present in the air duct. DESCRIPTION introduced into this air duct system will be distributed throughout the building. Smoke detectors designed for use in air duct systems are used sense the presence of smoke in the duct. D355PL Air Duct Smoke Detector utilizes photoelectric technology for detection of smoke. This detection method, when combined with an ef- housing design, samples air passing through the duct and allows detec- of a developing hazardous condition. When sufficient smoke is sensed, alarm signal is initiated at t