Home » Fire-Lite Duct Smoke Detector Accessories
File preview
Click the button below to download immediately for free
Show text preview
Duct Smoke Detector smoke detector accessories add functionality to the duct system by allowing quick, convenient inspections at eye and effective audible and visual notification options. All Sensor duct smoke detectors and accessories are UL PIEZO ANNUNCIATOR APA151 piezo annunciator, which replaces the APA451 a new, improved look, provides an audible alarm signal, a LED to indicate alarm status, and a green LED to indicate status. It is intended for use with System Sensor 4-wire duct smoke detector applications without a system panel, to comply with NFPA 90A. SpectrAlert Advance Mini-Horns Piezo Annunciator Voltage Voltage Alarm Current Range Humidity Gauge 24 VDC to 33 VDC mA to 120 (0 to 49 to 93%, non-condensing to 18 AWG H x 2.9 W x .45 D MINI-HORNS MHR and MHW SpectrAlert Advance mini-horns feature or continuous tones at high and low volume settings. small footprint allows mounting to single-gang back for applications where a small device is desired. Current Draw Range Range Sounder Frequency Gauge 12 DC or FWR (Full Rectified) or Regulated VDC or FWR to 33 VDC (9 to 33 VDC with Module) mA RMS max. at 8 to 17.5 DC mA RMS max. at 8 to 17.5 FWR mA RMS max. at 16 to 33 DC mA RMS max. at 16 to 33 FWR to 120 (0 to 49 to 93% non-condensing kHz to 18 AWG x 2.9 x 0.45 1/27/12 Page 1 of 4 REMOTE ANNUNCIATORS RA100Z and RA100ZA remote annunciators are designed both conventional and intelligent applications. Their red LED visual indication of an alarm condition. Remote Annunciator Range Alarm Current System: 3.1 to 32 System: 18 to 32 mA x 2.8 x 1.3 REMOTE TEST STATIONS RTS151 and RTS151KEY remote test stations are auto- fire detector accessories designed to test duct smoke from a convenient location. For 4-wire detectors, the test station features a multi-colored LED that alter- between steady green and red. For 2-wire detectors, the illuminates red for alarm. Remote Test Station with Key Requirements Response Time Range Humidity Gauge LED (Green): 14 to 35 12 mA max. LED (RED): 2.8 to 32 12 mA max. seconds max. to 140 (-10 to 60 non-condensing to 18 AWG x 2.75W x 1.8 MULTI-SIGNALLING ACCESSORIES RTS2 and RTS2-AOS multi-signaling accessories are to work with InnovairFlex 4-wire conventional duct detectors. These accessories include a key switch that be used to select one of two connected sensors to be reset, or both by a push button switch. They also enable measurements using the SENS-RDR sensitivity (sold separately). The AOS (Add-On Strobe) is an accessory included with the RTS2-AOS model. and RTS-AOS Multi-signaling Accessory Requirements Range Humidity Gauge to 29 VDC 3.0 mA max. 16.0 mA max. without Strobe: 30 mA with Strobe: 55 mA max. dBA at 10 ft. to 140 (-10 to 60 non-condensing to 22 AWG x 5.3 x 1.6 Remote Test Station Requirements Switch Switch Response Time Range Humidity Gauge LED 2.8 to 32 VDC, 10 max. Current: 95 mA max. VA @ 32 VDC VA @ 32 VDC seconds
Duct Smoke Detector smoke detector accessories add functionality to the duct system by allowing quick, convenient inspections at eye and effective audible and visual notification options. All Sensor duct smoke detectors and accessories are UL PIEZO ANNUNCIATOR APA151 piezo annunciator, which replaces the APA451 a new, improved look, provides an audible alarm signal, a LED to indicate alarm status, and a green LED to indicate status. It is intended for use with System Sensor 4-wire duct smoke detector applications without a system panel, to comply with NFPA 90A. SpectrAlert Advance Mini-Horns Piezo Annunciator Voltage Voltage Alarm Current Range Humidity Gauge 24 VDC to 33 VDC mA to 120 (0 to 49 to 93%, non-condensing to 18 AWG H x 2.9 W x .45 D MINI-HORNS MHR and MHW SpectrAlert Advance mini-horns feature or continuous tones at high and low volume settings. small footprint allows mounting to single-gang back for applications where a small device is desired. Current Draw Range Range Sounder Frequency Gauge 12 DC or FWR (Full Rectified) or Regulated VDC or FWR to 33 VDC (9 to 33 VDC with Module) mA RMS max. at 8 to 17.5 DC mA RMS max. at 8 to 17.5 FWR mA RMS max. at 16 to 33 DC mA RMS max. at 16 to 33 FWR to 120 (0 to 49 to 93% non-condensing kHz to 18 AWG x 2.9 x 0.45 1/27/12 Page 1 of 4 REMOTE ANNUNCIATORS RA100Z and RA100ZA remote annunciators are designed both conventional and intelligent applications. Their red LED visual indication of an alarm condition. Remote Annunciator Range Alarm Current System: 3.1 to 32 System: 18 to 32 mA x 2.8 x 1.3 REMOTE TEST STATIONS RTS151 and RTS151KEY remote test stations are auto- fire detector accessories designed to test duct smoke from a convenient location. For 4-wire detectors, the test station features a multi-colored LED that alter- between steady green and red. For 2-wire detectors, the illuminates red for alarm. Remote Test Station with Key Requirements Response Time Range Humidity Gauge LED (Green): 14 to 35 12 mA max. LED (RED): 2.8 to 32 12 mA max. seconds max. to 140 (-10 to 60 non-condensing to 18 AWG x 2.75W x 1.8 MULTI-SIGNALLING ACCESSORIES RTS2 and RTS2-AOS multi-signaling accessories are to work with InnovairFlex 4-wire conventional duct detectors. These accessories include a key switch that be used to select one of two connected sensors to be reset, or both by a push button switch. They also enable measurements using the SENS-RDR sensitivity (sold separately). The AOS (Add-On Strobe) is an accessory included with the RTS2-AOS model. and RTS-AOS Multi-signaling Accessory Requirements Range Humidity Gauge to 29 VDC 3.0 mA max. 16.0 mA max. without Strobe: 30 mA with Strobe: 55 mA max. dBA at 10 ft. to 140 (-10 to 60 non-condensing to 22 AWG x 5.3 x 1.6 Remote Test Station Requirements Switch Switch Response Time Range Humidity Gauge LED 2.8 to 32 VDC, 10 max. Current: 95 mA max. VA @ 32 VDC VA @ 32 VDC seconds