Fire-Lite ECC-RPU Remote Paging Unit

ECC-RPU Page Unit ECC-RPU is an optional Remote Page Unit that is com- with the ECC-50/100(E) Emergency Command Center fire protection applications. It is part of the family of external consoles that allows for extending the ECC-50/100(E) and control to remote locations within a building. It is in a cabinet with a keyed or an optional thumb lock to access to qualified personnel. ECC-RPU includes a built-in microphone and 8 selection that can be pushed to activate the system remotely. CALL paging can be broadcast over the speaker circuits depressing the microphone’s push-to talk button. As an benefit, the 9th button on the RPU can be used to acti- an MMF-300 monitor module that may be installed inside ECC-RPU cabinet to be used for applications such as shutdown. The ECC-RPU requires an external data bus an external audio riser connection, and an exter- operator interface power connection (24 Volts DC) from the main console. APPLICATIONS Schools Theaters Auditoriums Dormitories Healthcare Facilities Factories Military Facilities Places of Worship Restaurants Office Buildings Provides messaging status and control of the ECC-50/ primary operator console. Modular design for maximum system flexibility and easy Supports both Class A (Style Z) and Class B (Style Y) wir- A maximum of eight ECC-RPUs can be connected to an primary operating console. Built-in microphone with push-to-talk feature that can be for ALL CALL paging. Up to fourteen programmable messaging functions that can activated over speaker zones remotely. Sturdy cabinet design with a keyed lock to prevent unautho- access. Optional thumb lock available. Simple and straightforward user interface. Additional 9th button can be used to activate an optional monitor module installed inside the cabinet for such as HVAC shutdown. Specifications POWER REQUIREMENTS: 24VDC non-resettable power from the ECC-50/ External Operator Interface Power (Non-supervised). ECC-50/100(E) Product Manual P/N LS10001-000FL-E standby and alarm current requirements as well as battery C-230 Communications Requirements Product Installation Document PN: LS10030-000FL-E detailed wiring requirements. Accessories TR-6-R: Trim ring for ECC-RPU (Red). 17.624 x 16 provides a 1.5 wall coverage around the box). MMF-300: Monitor module used to supervise dry contact ECC-THUMBLTCH: Optional Thumb Latch. (Non UL- devices. and Indicators BUTTON CONTROLS All Call Button Message Select Buttons 1-14 Microphone Push to talk switch Message Button 9 STATUS System in Use (green) OK to Page (green) Mic Trouble (yellow) Message 1-8 Active (red) Message 1-8 Fault (yellow) Power (green) Data Bus Fault (yellow) Audio Riser Fault (yellow) Board Fault (yellow) (VISIBLE WITH DOOR 6/30/2015 Page 1 of 4 options amplifier Circuit Circuits & TB21 circuit expander firefighter telephone local console remote unit remote battery – J7 audio 50W amplifier 125W amplifier remote CHG-120F charger charger Emergency Command Center (Possible Configurations) 2 of 4 DF-60761:C 6/30/2015 Line Information (Ordering Remote Page Unit Hand held microphone, 14 buttons. (Primary operating Console) 50 Watt, 25VRMS speaker zone emergency voice evacuation system, microphone, built in tone generator and 14 recordable