Home » Fire-Lite Gentex AVP Strobe
File preview
Click the button below to download immediately for free
Download “Fire-Lite Gentex AVP Strobe” Fire-Lite_Gentex_AVP_Strobe.pdf – Downloaded 0 times – 779 KB
Show text preview
July 28, 1998 AVP Retrofit Strobes Audio/Visual Devices Gentex AVP Series is designed to make ADA retrofits snap, allowing the combination of existing audible appli- with ADA-compliant strobes. FEATURES 24 VDC xenon visible appliances. UL 1971 listed. Flash rate of 1 Hz. 15/75 and 30/75 models provide 75 candela minimum Accepts most audible appliances: front-mount horn, bell output. or speakers. Tamper-resistant lens. Polarized in/out wiring. Complies with ADA 4.28.3 mounting requirements of 80″ m) from floor. Available in Fire Alarm Red. Strobes available in wall-mount configurations only. Textured finish. Flying leads. INFORMATION 1) (cid:147)WR(cid:148) = Wall-mount, Red faceplate. 2) ALL 24 VDC MODELS operate from 21 – 30 VDC -20%/+10%. At 24 VDC, 15/75 candela units have a startup current of 130 mA and a peak operating current of 110 mA; 30/75 units have a startup current of 120 mA and a peak operating current of 160 mA; 110 candela units have a current of 148 mA and a peak operating current of 240 mA. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 All strobes are designed to flash as specified with continuous applied voltage. appliance is NOT recommended for use on coded or pulsing signaling cir- CONDUCTIVITY 18 AWG (0.75 mm2) (cid:151) 60 AWG (1.30 mm2) (cid:151) 95 AWG (2.00 mm2) (cid:151) 153 AWG (3.25 mm2) (cid:151) 244 Power is supplied when control panel is latched. WIRE DISTANCE* (in feet) = Panel Voltage (cid:151) Device Minimum Voltage Wire Conductivity wire distance includes wire to and from device. Current Draw Equation above applies only to regulated devices. Each wire run must be broken to provide supervision signal circuit. mounting boxes: 4″ (10.16 cm) square metal or non-metallic switch/outlet 1-1/2″ (3.81 cm) deep minimum. Gangable: 2-gang switch/masonry outlet boxes, 1-1/2″ cm) deep minimum. guidelines: Mount one box for each signaling device. Run insulated conductor from the signaling circuit in the Use UL-listed Class 1 wire. 2 of 2 (cid:151) DF-51924
July 28, 1998 AVP Retrofit Strobes Audio/Visual Devices Gentex AVP Series is designed to make ADA retrofits snap, allowing the combination of existing audible appli- with ADA-compliant strobes. FEATURES 24 VDC xenon visible appliances. UL 1971 listed. Flash rate of 1 Hz. 15/75 and 30/75 models provide 75 candela minimum Accepts most audible appliances: front-mount horn, bell output. or speakers. Tamper-resistant lens. Polarized in/out wiring. Complies with ADA 4.28.3 mounting requirements of 80″ m) from floor. Available in Fire Alarm Red. Strobes available in wall-mount configurations only. Textured finish. Flying leads. INFORMATION 1) (cid:147)WR(cid:148) = Wall-mount, Red faceplate. 2) ALL 24 VDC MODELS operate from 21 – 30 VDC -20%/+10%. At 24 VDC, 15/75 candela units have a startup current of 130 mA and a peak operating current of 110 mA; 30/75 units have a startup current of 120 mA and a peak operating current of 160 mA; 110 candela units have a current of 148 mA and a peak operating current of 240 mA. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 All strobes are designed to flash as specified with continuous applied voltage. appliance is NOT recommended for use on coded or pulsing signaling cir- CONDUCTIVITY 18 AWG (0.75 mm2) (cid:151) 60 AWG (1.30 mm2) (cid:151) 95 AWG (2.00 mm2) (cid:151) 153 AWG (3.25 mm2) (cid:151) 244 Power is supplied when control panel is latched. WIRE DISTANCE* (in feet) = Panel Voltage (cid:151) Device Minimum Voltage Wire Conductivity wire distance includes wire to and from device. Current Draw Equation above applies only to regulated devices. Each wire run must be broken to provide supervision signal circuit. mounting boxes: 4″ (10.16 cm) square metal or non-metallic switch/outlet 1-1/2″ (3.81 cm) deep minimum. Gangable: 2-gang switch/masonry outlet boxes, 1-1/2″ cm) deep minimum. guidelines: Mount one box for each signaling device. Run insulated conductor from the signaling circuit in the Use UL-listed Class 1 wire. 2 of 2 (cid:151) DF-51924